L-Com BT-CAT5-R0512 100/1000 Base-T Power Over Ethernet Splitter/Tap

The L-Com BT-CAT5-R0512 is a Gigabit Ethernet Power over Ethernet splitter/tap that decouples power and data signals from a single PoE source, enabling non-PoE devices to operate in 802.3af-compliant networks. Operating at 10/100/1000 Mbps, it transmits both signals up to 328 feet (100 meters) over standard Cat5 cabling and supports both PoE Mode A (network switch sourced) and Mode B (midspan/injector sourced) configurations. The device separates incoming 48V DC power into user-selectable output levels - 5V DC @ 2A, 7.5V DC @ 1.5A, 9V DC @ 1.2A, or 12V DC @ 1A - via DIP switch configuration, while maintaining independent data connectivity. Installation at the end device eliminates dependency on adjacent AC power, simplifying deployments of IP cameras, wireless access points, and other networked equipment in remote or constrained locations.

Technical Specifications Data & Power:

Data rates: 10/100/1000 Mbps (Gigabit Ethernet)

Input: 48V DC, 400mA

Output voltage (DIP-selectable): 5V DC @ 2A | 7.5V DC @ 1.5A | 9V DC @ 1.2A | 12V DC @ 1A

Maximum transmission distance: 328 feet (100 meters)

IEEE 802.3af compliant; supports PoE Mode A and Mode B Protection:

Over Thermal Protection (OTP)

Over Current Protection (OCP)

Over Voltage Protection (OVP) Interfaces & Connectors:

1x RJ45 Data/Power Input

1x RJ45 Data Output

1x DC Power Output Jack

18-inch DC Power Cable Kit with 2.1mm and 2.5mm plugs (straight and right-angle) Physical:

Dimensions: 2.7 x 2.0 x 0.9 inches (70 x 53 x 24 mm)

Weight: 5.6 oz (160 g)

LED power indicator Environmental:

Operating: 0°C to 40°C, 10–80% RH (non-condensing)

Storage: -40°C to 70°C, 5–90% RH (non-condensing)

Key Features

Selectable output voltage accommodates diverse endpoint power requirements

Triple-layer protection guards against thermal, current, and voltage faults

Compact form factor for tight equipment mounting scenarios

Flexible connector kit supports varied power jack geometries

Typical Applications

Remote IP camera and wireless access point deployment

Network device installation in difficult-to-access locations

Integration of legacy non-PoE equipment into existing PoE infrastructure

Single-cable power and data distribution

Compatibility & Integration The BT-CAT5-R0512 interfaces with any IEEE 802.3af PoE source operating in Mode A or Mode B, including network switches and midspan injectors. It outputs independent data and power signals, enabling direct connection to non-PoE devices without additional adapters or converters.