Abaco Systems / SBS C2K33210C Embedded Computer
High-performance embedded computer for demanding applications.
- Model
- Abaco Systems / SBS C2K33210C
- Calibration
- Available on request
- Price · starting from
- $750
- Status
- In stock
- RFQ ref
- C2K33210C
This unit
The Abaco Systems C2K33210C is a 6U CompactPCI embedded computer built for defense, aerospace, and homeland security applications. Built around a Freescale MPC7447A PowerPC G4 processor running at up to 1 GHz, it delivers the processing power needed for complex real-time operations in rugged environments. The system supports up to 1 GB of DDR SDRAM with ECC, protected memory for fault-tolerant processing.
The Marvell MV64460 bus interface chip manages data flow across dual expansion slots, enabling modular payload integration.
Technical Specifications
- Processor: Freescale MPC7447A PowerPC G4 at up to 1 GHz
- Memory: Up to 1 GB DDR SDRAM with ECC
- Bus Interface: Marvell MV64460
- Expansion Slots: 2
- Form Factor: cPCI 6U
- Ruggedization: Level 1-5 Air and Conduction Cooled configurations available
Key Features
- Dual SATA 1.0 ports (1.5 Gb/s each) for direct storage attachment
- Three USB 2.0 ports for peripheral connectivity
- Three Gigabit Ethernet ports supporting network integration
- Eight serial ports: four RS-232/RS-422 and four RS-422/RS-485 for legacy and modern instrumentation
- 16 programmable GPIO ports with independent interrupts for custom I/O logic
- Convection-cooled (C-style) and conduction-cooled (N-style) thermal options for diverse thermal environments
Typical Applications Defense command and control systems, airborne avionics processing, border security platforms, and distributed sensor networks benefit from the C2K33210C's deterministic processing, multi-protocol serial support, and thermal flexibility.
Compatibility & Integration The C2K33210C accepts C2K-TM transition modules, enabling adaptation to mission-specific I/O requirements. Hardware reference manuals and family datasheets are available to guide integration engineers through board-level design and firmware development.
Abaco Systems / SBS C2K33210C — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Abaco Systems / SBS C2K33210C. Calibration covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Abaco Systems / SBS C2K33210C faults: power supply failure (cRIO-9073/9074), C-series slot connector wear, PXI chassis fan failure, GPIB interface failure on VXI controllers, BIOS/EEPROM corruption. NI CompactRIO most common faults are power supply failure on older cRIO-9073/9074 chassis and C-series module slot connector wear from repeated hot-swap cycles. PXI chassis fan failure is the most common wear item — chassis fans are field-replaceable. VXI embedded controllers most commonly develop EEPROM corruption and GPIB interface failure.
Abaco Systems / SBS C2K33210C price
This Abaco Systems / SBS C2K33210C is listed at $750. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Abaco Systems / SBS C2K33210C calibration cost
NIST-traceable calibration for the Abaco Systems / SBS C2K33210C is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. Turnaround is 1 to 3 business days after receipt. See full calibration details →
