Kepco DPS-12.5-6M
The Kepco DPS-12.5-6M is a single-output, programmable DC power supply. It delivers a voltage range of 0-12.5V and a current range of 0-6A, with a power rating of 75W. Designed for benchtop or system integration, it features remote control capabilities, allowing for seamless integration into automated testing and control systems. The DPS series provides stable and precise power, making it suitable for a variety of applications.
- Model
- Kepco DPS-12.5-6M
- Calibration
- Available on request
- Price
- $650
- Status
- In stock
- RFQ ref
- DPS-12.5-6M
This unit
The Kepco DPS-12.5-6M is a 75 W single-output programmable DC power supply for benchtop use or system integration. It delivers 0-12.5 V DC at 0-6 A with automatic crossover between voltage and current regulation modes. The front-panel keypad controls voltage, current limit, range, and OVP settings with separate LED displays for voltage and current readout. RS-232 connectivity via KOIB protocol enables remote control from BASIC or standard programming languages. Remote sensing compensates for up to 0.5 V drop per output lead. Fast voltage recovery under step load current occurs in less than 50 microseconds, with no overshoot above 25% voltage setting. The unit operates from single-phase AC mains without range selection and provides 500 V isolation to chassis.
Technical Specifications
Output voltage: 0-12.5 V DC
Output current: 0-6 A DC
Power rating: 75 W
Input current (max load @ 110 VAC): 1.7 A
Voltage/current regulation: Automatic crossover
Remote sensing: ±0.5 V drop compensation per output lead
Voltage recovery (step load): < 50 microseconds
Overshoot (turn-on/off): None above 25% voltage setting; negligible below 25% when preloaded to 100% minimum
Isolation voltage: 500 V to chassis
Control signal: 10 mA control current at 100 ohms per volt, or ±5 V ±1 mA analog control
DIP switch: 8-position for KOIB address and baud rate (default: address 1, 9600 baud)
Key Features
Dual-mode front-panel and remote control via RS-232
KOIB protocol support with software examples in QuickBASIC
Large-character LED displays for real-time voltage and current monitoring
Forced-air cooling with built-in blower
Barrier strip rear panel with separate heavy-duty output terminals
FED. STD. 595 light gray finish (Color 26440)
Removable side handles and skids available
Typical Applications
Automated testing and control systems
Research and laboratory power sourcing
System integration requiring precise voltage and current regulation
Compatibility & Integration Rack mounting is supported via the RA 56 rack adapter. RS-232 interface accommodates integration into multi-instrument test setups using BASIC and standard programming languages.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | 0-12.5V DC, 0-6A DC |
Kepco DPS-12.5-6M — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Kepco DPS-12.5-6M. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Kepco DPS-12.5-6M price
This Kepco DPS-12.5-6M is listed at $650. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Kepco DPS-12.5-6M calibration cost
NIST-traceable calibration for the Kepco DPS-12.5-6M is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
