Agilent / Keysight DSOX1202A Oscilloscope: 70/100/200 MHz, 2 Analog Channels

Agilent / Keysight Digital Oscilloscopes. Bandwidth: 70 MHz (base), Channels: 2 analog + 1 external trigger/digital channel, Sample Rate: 2 GSa/s (all channels).

Model
Agilent / Keysight DSOX1202A
Calibration
Available on request
Price
$1,422
Status
In stock
RFQ ref
DSOX1202A
View cart
Prefer to talk? Call +1 (484) 841-9341

This unit

The Keysight DSOX1202A is a 2-channel digital storage oscilloscope with a base bandwidth of 70 MHz, upgradeable to 100 MHz or 200 MHz. It delivers 2 GSa/s sample rate across all channels, 2 Mpts memory depth, and 200,000 waveforms/sec update rate via MegaZoom IV technology. The instrument combines real-time acquisition with advanced triggering, serial protocol analysis, and comprehensive measurement capabilities in a compact 3.23 kg form factor.


Technical Specifications



  • Bandwidth: 70 MHz (base), upgradeable to 100 MHz or 200 MHz

  • Channels: 2 analog + 1 external trigger/digital channel

  • Sample Rate: 2 GSa/s (all channels)

  • Memory Depth: 2 Mpts

  • Waveform Update Rate: 200,000 waveforms/sec

  • Vertical Resolution: 8 bits

  • Display: 7-inch TFT LCD WVGA

  • Input Coupling: AC, DC, Ground (selectable)

  • Probe Attenuation: 0.1X to 10,000X (selectable)

  • Bandwidth Limiting: Approximately 20 MHz (selectable)

  • Power Supply: 100–240 VAC, 50/60 Hz, 50 W maximum consumption

  • Dimensions: 314 mm × 165 mm × 130 mm

  • Weight: Approximately 3.23 kg


Key Features



  • Edge, pulse width, pattern, rise/fall time, setup/hold, video, and serial triggering

  • Built-in digital voltmeter and frequency counter

  • Mask testing and waveform math (add, subtract, multiply, divide, FFT, low-pass filter)

  • FFT spectral analysis and reference waveforms

  • Automatic voltage, time, and count measurements

  • Frequency Response Analysis (Bode plots) in optional G models

  • Serial protocol analysis: I²C, SPI, UART/RS-232, CAN, LIN

  • USB 2.0 (host and device) and LAN connectivity

  • Included 1:1/10:1 switchable passive probes (N2140A, 200 MHz)


Typical Applications Education, embedded systems design, mixed-signal debugging, serial bus troubleshooting, and frequency domain analysis.


Compatibility & Integration BenchVue software is included for instrument control, data capture, and annotation. Infiniiium Offline analysis software supports further waveform processing. Compatible with Keysight N2140A 200 MHz probes.

Specifications

ParameterValue
Frequency Range200 MHz), 70 MHz (upgradeable to 100 MHz | Voltage / Current Range: 100 V to 240 V

Agilent / Keysight DSOX1202A — Repair & Calibration Service

Aumictech offers NIST-traceable calibration and repair for the Agilent / Keysight DSOX1202A. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.

Standard Cal
$450
Pass/fail cert + NIST sticker
Cal with Data
$650
Full NIST cert with measured values

Agilent / Keysight DSOX1202A price

This Agilent / Keysight DSOX1202A is listed at $1,421.8. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.

Agilent / Keysight DSOX1202A calibration cost

NIST-traceable calibration for the Agilent / Keysight DSOX1202A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →