LeCroy DXC200 Passive Differential Probe Pair, 50MHz
The LeCroy DXC200 is a passive differential probe pair designed for differential signal measurements. It features a bandwidth of 50MHz and is suitable for use with LeCroy oscilloscopes. This probe pair allows for accurate measurement of differential signals, which are common in many electronic circuits.
- Model
- Lecroy DXC200
- Calibration
- Available on request
- Price
- $979
- Status
- In stock
- RFQ ref
- DXC200
This unit
The LeCroy DXC200 is a passive differential probe pair engineered for high-fidelity differential signal measurements with minimal capacitance loading. This x1 attenuation probe pair integrates with Teledyne LeCroy DA1800 series differential amplifiers to deliver full gain and Common Mode Rejection Ratio (CMRR) performance at the probe tip, enabling 100 MΩ input resistance measurements across demanding test environments.
Technical Specifications
Bandwidth & Speed- DC to 50 MHz with DA1855A amplifier
- DC to 10 MHz with DA1822A amplifier
- Rise time: 7 ns (typical) with DA1850/DA1855 amplifiers
- Rise time: 35 ns (typical) with DA1820/DA1822 amplifiers Input Characteristics
- Input resistance: 100 MΩ
- Maximum input voltage: 500 V
- Attenuation: x1 Physical
- Cable length: 0.7 meters
- Color: Black
Key Features
- Passive differential design minimizes capacitance loading versus coaxial cable alternatives
- Full DA1800 series amplifier gain available at probe tip
- Maintains specified CMRR across supported bandwidth
- Practical probe-to-circuit attachment geometry
- x1 unity gain configuration for direct voltage measurement
Typical Applications Differential signal acquisition on low-impedance circuits where capacitive loading and signal integrity are critical. Power supply rail monitoring, differential pair characterization, and low-level analog signal detection in presence of high common-mode voltages.
Compatibility & Integration Compatible Amplifiers
- DA1855A, DA1850 (50 MHz bandwidth)
- DA1822A, DA1820 (10 MHz bandwidth)
- DA1800 series Oscilloscope Integration
Compatible with specific Teledyne LeCroy oscilloscopes. Verify ProBus interface and MAUI firmware compatibility with target instrument. Designed for use with instruments featuring permanent earth grounding.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | DC to 50 MHz (with DA1855A) |
| DC to 10 MHz (with DA1822A) | Voltage / Current Range | 500 V maximum input |
Lecroy DXC200 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Lecroy DXC200. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Lecroy DXC200 price
This Lecroy DXC200 is listed at $979. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Lecroy DXC200 calibration cost
NIST-traceable calibration for the Lecroy DXC200 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
