Lambda / TDK / EMI ESS150-100-11-D-1413
Lambda / TDK / EMI DC Power Supplies. Voltage: ** 150 Vdc maximum, Current: ** 100 Adc maximum.
- Model
- Lambda / TDK / EMI ESS150-100-11-D-1413
- Calibration
- Available on request
- Price
- $2,390
- Status
- In stock
- RFQ ref
- ESS150-100-11-D-1413
This unit
The Lambda/TDK/EMI ESS150-100-11-D-1413 is a 15 kW programmable DC power supply engineered for high-power applications demanding stable, reliable output. This ESS series unit delivers 150 Vdc at 100 Adc with dual-mode operation in constant voltage (CV) and constant current (CC) with automatic crossover. Pulse-by-pulse current limiting ensures performance in high-current scenarios including RF amplifiers, DC motor testing, and magnetic coil energization.
Technical Specifications
Output Power: 15 kW
Output Voltage: 150 Vdc maximum
Output Current: 100 Adc maximum
Efficiency: 85%
Power Factor: 0.9
Output Ripple: 120 mV RMS (5 Hz–1 MHz)
Operating Temperature: 0°C to 50°C continuous; derates 4% per °C above 50°C
Storage Temperature: −55°C to 85°C
Voltage Temperature Coefficient: 0.02% per °C of rated output
Current Temperature Coefficient: 0.03% per °C of rated output
Stability: ±0.05% maximum deviation over 8 hours at constant line, load, and temperature
Voltage Regulation (CV Mode): <0.1% for 100% load current change
Current Regulation (CC Mode): <0.1% for 100% load voltage change
Line Regulation: <0.1% across full AC input range in both CV and CC modes
Transient Response: <650 microseconds for 30% load step (units above 20 V scaled as Vmax/20)
Key Features
Ten-turn potentiometers for voltage and current adjustment
Dual meters for simultaneous output voltage and current indication
LED status indicators: Overvoltage Condition, Inverter Failure, Phase Loss, Control Failure
Analog programming via 0–5 Vdc interface (standard)
Optional RS232/IEEE 488 interface via RSTL controller board
Compact form factor with high reliability heritage since 1995
Typical Applications RF amplifier testing, DC motor characterization, magnetic coil energization, and high-current load simulation requiring precision voltage or current sourcing.
Compatibility & Integration Supports AC input configurations including 3-phase (190–250 Vac to 432–528 Vac) and single-phase options. Remote control via analog 0–5 Vdc command lines and optional RSTL interface for automated test environments.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | 0–100 ADC, 0–150 Vdc |
Lambda / TDK / EMI ESS150-100-11-D-1413 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Lambda / TDK / EMI ESS150-100-11-D-1413. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Lambda / TDK / EMI ESS150-100-11-D-1413 price
This Lambda / TDK / EMI ESS150-100-11-D-1413 is listed at $2,390. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Lambda / TDK / EMI ESS150-100-11-D-1413 calibration cost
NIST-traceable calibration for the Lambda / TDK / EMI ESS150-100-11-D-1413 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
