Kepco JQE15-6M
The Kepco JQE15-6M is a single-output, DC power supply designed for benchtop or system integration. It delivers 0-15V DC at 0-6A with excellent stability and low ripple. Features include voltage and current metering, remote programming capabilities, and overvoltage protection for sensitive loads.
- Model
- Kepco JQE15-6M
- Calibration
- Available on request
- Price
- $550
- Status
- In stock
- RFQ ref
- JQE15-6M
This unit
The Kepco JQE15-6M is a 100-watt DC power supply in quarter-rack form factor, engineered for laboratory and system integration applications requiring precise voltage and current regulation. It delivers 0–15V DC at 0–6A with exceptional load and line regulation, making it suitable for component characterization, device testing, and embedded power applications where stability and protection are critical.
Technical Specifications Output Performance
Output voltage: 0–15V DC
Output current: 0–6A
Output power: 100W
Voltage regulation: 0.01% load / 0.001% line
Current regulation: 0.02% load / 0.01% line
Voltage ripple and noise: 0.02% pk-pk
Current ripple and noise: 0.02% rms
Voltage stability: 0.01% + 1mV over 8 hours
Current stability: 0.02% + 0.5mA over 8 hours
Temperature coefficient (voltage): 0.01%/°C + 0.5mV/°C
Temperature coefficient (current): 0.02%/°C + 0.5mA/°C Input
AC input: 115V/230V, 50–65Hz
Input current (125V AC): 2.1A maximum Output Impedance
Voltage mode series resistance: 125µΩ
Voltage mode series inductance: 1µH
Current mode shunt resistance: 84kΩ
Current mode shunt capacitance: 1µF
Key Features
Single-output design with independent voltage and current control
10-turn potentiometer for high-resolution voltage adjustment
Adjustable current limiting (10% to 105% of maximum)
Built-in overvoltage protection for load safety
Analog metering via front-panel meters (standard 'M' suffix)
Remote analog programming via 1000Ω/Volt or 0–1mA control
Digital interface support (SN-series, listen-only)
External current-sense resistor capability
CE marked per EN61010-1 and Low Voltage Directive (LVD)
ISO 9001 quality certified
Typical Applications Component test and validation, power device characterization, electronics bench work, embedded system powering, and OEM integration in rack-mount systems.
Compatibility & Integration Operates across 0°C to +55°C ambient temperature range. Available in quarter-rack chassis with scalable 1/2 and full-rack configurations for multi-unit deployments. SN-series digital control and analog programming options enable flexible system integration.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | 0–15V DC, 0–6A |
Kepco JQE15-6M — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Kepco JQE15-6M. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Kepco JQE15-6M price
This Kepco JQE15-6M is listed at $550. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Kepco JQE15-6M calibration cost
NIST-traceable calibration for the Kepco JQE15-6M is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
