Kepco JQE6
The Kepco JQE6 is a power supply unit. Designed for providing stable and reliable DC power, it is suitable for a variety of applications including laboratory testing, industrial control, and automated equipment. It features adjustable voltage and current settings, allowing users to fine-tune the output to meet specific requirements.
- Model
- Kepco JQE6
- Calibration
- Available on request
- Price
- $350
- Status
- In stock
- RFQ ref
- JQE6
This unit
The Kepco JQE6 is a precision regulated DC power supply engineered for applications demanding stable, low-noise output and fine control resolution. This half-rack configuration unit delivers programmable constant voltage and constant current operation with full-range front panel adjustment and optional remote control via resistance or control voltage input. The linear series-regulator topology, driven by integrated circuit operational amplifiers, yields output ripple below 3 mV and MIL-STD-461 compliance.
Technical Specifications Output Characteristics
Programmable constant voltage and constant current operation
Output ripple: <3 mV
Isolation: 500 V DC or p-p maximum between chassis and output terminals
Common mode current: <5 µA RMS or 50 µA peak-to-peak at 115 V AC, 60 Hz
Multiple output configurations available: 0–6 V at 45 A, 0–15 V at 12–25 A, 0–25 V at 10–20 A Input Specifications
AC input: 105–125 V AC or 210–250 V AC, 50–65 Hz, single phase
Power factor: ~0.9
Power ratings: 250 W and 500 W half-rack models Control & Adjustment
Multi-turn front panel rheostats for voltage tuning
Adjustable current limiting: 10–105% of maximum rated output current
Remote voltage control: 1000 Ω per volt of output or 0–1 mA control voltage
Optional remote current control (suffix "Y")
Zero calibration adjustment (suffix "E") for precision programming
Key Features
Multi-turn controls enable precise output adjustment and measurement repeatability
Optional analog meters (suffix "M") with full-scale range switches for simultaneous voltage and current monitoring
Digital meter option (suffix "DM"): voltage accuracy 0.02%, current accuracy 1.5%
Optional locking screwdriver-adjustable controls (suffix "L") prevent inadvertent drift
Constant current operation via external sensing resistor
Typical Applications Laboratory test and measurement, precision instrumentation calibration, component characterization, and systems requiring MIL-STD-461 EMC compliance.
Compatibility & Integration Front panel controls and rear terminal configurations support standalone operation and integration into larger test systems via optional remote programming interfaces.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | 0-15V/12-25A, 0-25V/10-20A, 0-6V/45A |
Kepco JQE6 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Kepco JQE6. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Kepco JQE6 price
This Kepco JQE6 is listed at $350. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Kepco JQE6 calibration cost
NIST-traceable calibration for the Kepco JQE6 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
