JDS Uniphase MAPS+2W731W1FP
JDS Uniphase Modular Instrument Chassis.
- Model
- JDS Uniphase MAPS+2W731W1FP
- Calibration
- Available on request
- Price
- $3,800
- Status
- In stock
- RFQ ref
- MAPS+2W731W1FP
This unit
The JDS Uniphase MAPS+2W731W1FP is a hot-swappable optical test module designed for the Multiple Application Platform System (MAPS). This cassette-based instrument integrates into either the 19-inch 8-slot Master chassis (MAP+2M00) or the 9.5-inch 3-slot Benchtop chassis (MAP+2B00), enabling flexible configuration for diverse optical characterization tasks. Module installation and removal occur without system power-down, supporting continuous operation in laboratory and enterprise test environments.
Technical Specifications
Platform Compatibility: JDS Uniphase MAPS architecture
Chassis Options: 19-inch rackmountable Master (8-slot) or 9.5-inch Benchtop (3-slot) configurations
Hot-Swap Capability: Module exchanges without operational interruption
Control Interfaces: RS-232 and GPIB remote control
Software Environment: ActiveX console with simulation mode and device drivers
Firmware: Automatic cassette identification upon installation
Operating Temperature: 0 to 50 °C
Storage Temperature: -30 to 60 °C
Humidity: < 80% RH (0 to 40 °C, non-condensing)
Key Features
Modular cassette design for rapid system reconfiguration
Automatic module detection simplifies setup and integration
Remote command control via industry-standard interfaces
Operates across optical test and measurement wavelength ranges common to the MAPS platform
Typical Applications
Optical component and system characterization
DWDM channel testing and analysis
Optical amplifier performance evaluation
Bit error rate (BER) measurement
Signal routing verification in optical networks
Compatibility & Integration The MAPS+2W731W1FP functions within the complete JDS Uniphase MAPS ecosystem. It operates in both Master and Benchtop chassis variants, utilizing common firmware and control software. Standard ActiveX drivers enable integration with custom measurement applications and third-party test automation frameworks.
JDS Uniphase MAPS+2W731W1FP — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the JDS Uniphase MAPS+2W731W1FP. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
JDS Uniphase MAPS+2W731W1FP price
This JDS Uniphase MAPS+2W731W1FP is listed at $3,800. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
JDS Uniphase MAPS+2W731W1FP calibration cost
NIST-traceable calibration for the JDS Uniphase MAPS+2W731W1FP is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
