Santec MLS-8000 Multi-Channel Light Source Mainframe
Santec Optical Light Sources. Model: MLS-8000.
- Model
- Santec MLS-8000
- Calibration
- Available on request
- Price
- $2,950
- Status
- In stock
- RFQ ref
- MLS-8000
This unit
The Santec MLS-8000 is a rack-mountable mainframe designed to house and control up to eight optical light source modules, such as the ECL-200 and ECL-210 series. It has a stable, low-noise power source and integrated control platform for multi-channel optical testing and measurement applications. The unit features dual communication interfaces
GPIB and RS-232C - enabling external instrument control and system integration.
A dedicated communication CPU board manages all installed light source modules. The 19-inch rack-mountable chassis weighs approximately 20 kg and incorporates switchable power voltage selection via rear panel rotary switch. A key-lock power activation mechanism and front panel handles provide operational control.
Each module slot supports independent wavelength adjustment through 10-turn potentiometers or dials, with dedicated status indicators for ACC/APC modes and LD activation states.
Technical Specifications
- Chassis capacity: Up to 8 optical light source module slots
- Supported modules: Santec ECL-200, ECL-210 series
- Power source: Low-noise, switchable voltage via rear panel rotary switch
- Physical form factor: 19-inch rack-mountable
- Weight: Approximately 20 kg
- Rear clearance requirement: Greater than 5 cm for heat dissipation
- Recommended installation: Vibration-proof base
- Power input: 3-line cord with protective ground
Key Features
- Dual communication protocols: GPIB and RS-232C
- Communication CPU board for external control
- Independent wavelength adjustment per module via 10-turn potentiometers
- Front panel ACC/APC mode and LD activation status indicators
- Key-lock power activation
- Switchable power voltage selection
Typical Applications
- Multi-wavelength optical testing systems
- Fiber optic component characterization
- Optical network validation and troubleshooting
- Laboratory-scale photonics research
Compatibility & Integration The MLS-8000 integrates with Santec ECL-200 and ECL-210 series light source modules. External control via GPIB and RS-232C enables integration into automated test systems and measurement platforms.
Specifications
| Parameter | Value |
|---|---|
| Wavelength Range | 1270–1350 nm, 1430–1630 nm (>100 nm tuning range per module) |
Santec MLS-8000 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Santec MLS-8000. Calibration covers output power at specified wavelengths, wavelength accuracy, 15-minute output stability, and modulation frequency accuracy where applicable. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Santec MLS-8000 faults: laser diode end-of-life (output below spec), fiber output connector damage, output instability. Common repairs include laser diode replacement when output falls below spec, fiber output connector repair, and thermal management service.
Santec MLS-8000 price
This Santec MLS-8000 is listed at $2,950. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Santec MLS-8000 calibration cost
NIST-traceable calibration for the Santec MLS-8000 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers output power at specified wavelengths, wavelength accuracy, 15-minute output stability, and modulation frequency accuracy where applicable. Turnaround is 1 to 3 business days after receipt. See full calibration details →
