Diamond Systems MOR-400 Morpheus High Integration PC/104 Celeron CPU
Diamond Systems Embedded Test Systems. Model: MOR-400.
- Model
- Diamond Systems MOR-400
- Calibration
- Available on request
- Price
- $850
- Status
- In stock
- RFQ ref
- MOR-400
This unit
The Diamond Systems MOR-400 Morpheus is a high-integration PC/104 single-board computer engineered for embedded applications demanding compact form factor, low power consumption, and reliable operation across demanding thermal environments. Built around an Intel Ultra-Low Voltage Celeron processor (400 MHz or 650 MHz) with VIA VT8606/VT686B chipset, the board delivers integrated Savage4 2D/3D video acceleration, dual serial ports with configurable protocol support, Fast Ethernet, and flexible mass storage via IDE and CompactFlash interfaces.
Technical Specifications
Processor: Intel Ultra-Low Voltage Celeron, 400 MHz or 650 MHz, 100 MHz FSB, uBGA package
Chipset: VIA VT8606 (North Bridge), VIA VT82C686B (South Bridge)
Memory: User-supplied 144-pin PC133 SODIMM, up to 512 MB
Video: VIA Integrated Savage4 accelerator with 32 MB shared memory, 4× AGP, VGA and LCD display support
Storage: UDMA-33 IDE (up to 2 devices), CompactFlash Type I/II socket (up to 1 GB, bootable)
Networking: Realtek RTL8100BL, 10/100 Mbps, Wake-on-LAN capable
Serial: Two 16450-compatible ports (Port 1: RS-232 fixed; Port 2: RS-232/RS-422/RS-485 jumper-selectable)
USB: 2× USB 1.1
Expansion: PC/104 bus
Power: 5 VDC ±5%, 10.5 W @ 400 MHz (fanless), 15 W @ 650 MHz (with fan)
Operating Temperature: 0°C to +60°C
Dimensions: 90 mm × 96 mm; Weight: 110 g
Key Features
Programmable watchdog timer (1–127 seconds delay)
Configurable serial protocol support via jumper selection
Integrated Ethernet LED header for activity indication
PS/2 keyboard/mouse interface
Dual floppy drive support (20-pin header)
Parallel port header (20-pin)
Compatibility & Integration Supported operating systems: Linux, Windows 98/2000/XP/CE, DOS, QNX, VxWorks via DSC Universal Driver programming software. Power delivery via PC/104 bus or dedicated 4-pin connector.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | 5 VDC ±5% |
Diamond Systems MOR-400 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Diamond Systems MOR-400. Calibration covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Diamond Systems MOR-400 faults: power supply failure (cRIO-9073/9074), C-series slot connector wear, PXI chassis fan failure, GPIB interface failure on VXI controllers, BIOS/EEPROM corruption. NI CompactRIO most common faults are power supply failure on older cRIO-9073/9074 chassis and C-series module slot connector wear from repeated hot-swap cycles. PXI chassis fan failure is the most common wear item — chassis fans are field-replaceable. VXI embedded controllers most commonly develop EEPROM corruption and GPIB interface failure.
Diamond Systems MOR-400 price
This Diamond Systems MOR-400 is listed at $850. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Diamond Systems MOR-400 calibration cost
NIST-traceable calibration for the Diamond Systems MOR-400 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. Turnaround is 1 to 3 business days after receipt. See full calibration details →
