Anritsu MP1900A – BERT Signal Quality Analyzer Mainframe
Anritsu MP1900A,Signal quality analyzer for evaluating high-speed serial interfaces. Offers accurate BER testing, jitter tolerance, and PAM4 analysis up to 64 Gbit/s.
- Model
- Anritsu MP1900A
- Calibration
- Available on request
- Price
- $18,500
- Status
- In stock
- RFQ ref
- MP1900A
This unit
The Anritsu MP1900A Signal Quality Analyzer-R is a modular Bit Error Rate Tester (BERT) mainframe engineered for physical layer characterization of high-speed serial interfaces up to 512 Gbit/s. Supporting both NRZ and PAM4 signaling, the 8-slot mainframe accommodates Pulse Pattern Generators, Error Detectors, jitter/noise injection modules, and synthesizers for comprehensive signal quality analysis across Ethernet, PCIe, USB, Thunderbolt, InfiniBand, Fibre Channel, SAS, DisplayPort, and CEI standards.
Technical Specifications
- Transmission Capacity: Up to 512 Gbit/s
- Mainframe Slots: 8-slot modular architecture
- NRZ Operation: 2.4 Gbit/s to 32.1 Gbit/s (up to 64.2 Gbaud); supports up to 16 channels at 32 Gbit/s bandwidth
- PAM4 Operation: 2.4 to 64.2 Gbaud; up to 8 channels at 32 Gbit/s or 4 channels at 64 Gbit/s bandwidth
- Output Amplitude (Single-end): 0.1 Vp-p to 1.3 Vp-p
- Output Amplitude (Differential): 0.2 Vp-p to 2.6 Vp-p
- Intrinsic Jitter (PPG): 115 fs rms (typ.)
- ED Input Sensitivity: 15 mV typical (EYE Height)
- ED Analog Bandwidth: 40 GHz
- Emphasis: 10-tap built-in
- Low-Frequency Equalizer: ≤1 GHz, 2 dB typ.
- DFE: 1.4 dB typ.
- CTLE: Multi-band (8 Gbit/s, 16 Gbit/s, 28 Gbit/s bandwidths)
Key Features
- Jitter injection: SJ, RJ, BUJ, SSC
- Noise injection: CM, DM, white noise modes
- Variable ISI adjustment for intersymbol interference analysis
- RS-FEC pattern support with real-time PCIe 6.0 uncorrectable error measurement
- PCIe 6.0 Base Specification Receiver Test with Link Training and LTSSM analysis
- SRNS support with SKP filtering
- USB 3.2 Electrical Compliance Test instrument certification
Typical Applications
- Data-center interconnect validation
- Ethernet physical layer testing (100 GbE through 800 GbE)
- PCIe Gen1–Gen6 compliance and characterization
- USB 3.2 Gen1/2 and USB4 link training validation
- Thunderbolt signal integrity analysis
- InfiniBand, Fibre Channel, SAS, DisplayPort, and CEI-28G/56G/112G measurements
Compatibility & Integration
- Remote control: GPIB, LAN (10/100/1000 Base-T)
- Peripherals: USB (6×), VGA (1×), HDMI (1×)
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | Up to 40 GHz (ED Analog Bandwidth) | Voltage / Current Range: 0.2–2.6 Vp-p (differential) |
| Input | 15 mV typical, Output: 0.1–1.3 Vp-p (single-end) |
Anritsu MP1900A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu MP1900A. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Anritsu MP1900A price
This Anritsu MP1900A is listed at $18,500. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu MP1900A calibration cost
NIST-traceable calibration for the Anritsu MP1900A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
