Anritsu MP2110A
The Anritsu MP2110A is a versatile optical test platform used for evaluating optical modules and devices. It supports various communication standards and provides accurate measurements for R&D and manufacturing environments.
- Model
- Anritsu MP2110A
- Calibration
- Available on request
- Price
- $650
- Status
- In stock
- RFQ ref
- MP2110A
This unit
The Anritsu MP2110A BERTWave is an integrated optical test platform combining up to 4-channel Bit Error Rate Tester (BERT) and up to 4-channel sampling oscilloscope in a single instrument. Designed for efficient evaluation and production inspection of optical modules from 10G to 1.6T, it eliminates the need for separate test equipment, reducing capital expenditure and measurement time in high-volume manufacturing environments. The system features an integrated PC for measurement processing and supports simultaneous transmitter/receiver characterization of optical modules.
Technical Specifications BERT Performance
Operating frequency: 24.3 Gbit/s to 28.2 Gbit/s (standard); 9.5 Gbit/s to 14.2 Gbit/s (optional)
PPG jitter: 600 fs rms (typical)
Error detector sensitivity: 25 mV (typical) Sampling Oscilloscope Performance
Electrical bandwidth: 40 GHz
Optical bandwidth (SMF): 35 GHz (typical)
Optical bandwidth (MMF): 25 GHz (typical)
Sampling speed: Up to 250,000 samples per second (two channels simultaneous)
Optical sensitivity (SMF): -15 dBm (typical)
Optical noise (SMF): 3.4 µW (typical)
Intrinsic jitter: 200 fs rms (typical, with high-accuracy trigger option)
Eye diagram capture: 1 million samples of 25 Gbaud signals in approximately 5 seconds Signal Analysis
NRZ/PAM4 analysis with TDECQ support
PAM4 signal analysis up to 53-Gbaud
Built-in clock recovery unit (CRU) for NRZ and PAM4: 26/53 Gbaud
NRZ jitter component analysis
Automated mask margin testing
Key Features
Dual-function architecture reduces test setup complexity and footprint
High sampling rate delivers eye diagram analysis 65% faster than conventional instruments
25 mV error detector sensitivity enables BER measurements on attenuated signals
Internal PC eliminates external controller dependency
Supports 100 GbE, OTU4, and proprietary optical standards
Typical Applications
Optical module R&D characterization
Production acceptance testing
Transmitter and receiver performance validation
Eye pattern and mask margin compliance verification
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 24.3 Gbit/s to 28.2 Gbit/s (standard) |
| 9.5 Gbit/s to 14.2 Gbit/s (optional) | Power Range (dBm) | '-15 dBm (typical, SMF) |
Anritsu MP2110A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu MP2110A. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Anritsu MP2110A price
This Anritsu MP2110A is listed at $650. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu MP2110A calibration cost
NIST-traceable calibration for the Anritsu MP2110A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
