Anritsu MS27102A Remote Spectrum Monitor
The Anritsu MS27102A is a remote spectrum monitor designed for continuous monitoring of RF spectrum activity. It enables remote spectrum analysis, interference detection, and signal identification, making it ideal for regulatory compliance, spectrum clearing, and wireless network optimization. Its rugged design and remote capabilities make it suitable for outdoor and challenging environments.
- Model
- Anritsu MS27102A
- Calibration
- Available on request
- Price
- $1,679
- RFQ ref
- MS27102A
This unit
The Anritsu MS27102A Remote Spectrum Monitor is a field-deployable RF surveillance instrument designed for continuous spectrum monitoring in outdoor environments. Operating from 9 kHz to 6 GHz with 1 Hz tuning resolution, it delivers real-time interference detection, signal identification, and spectrum analysis critical for regulatory compliance and wireless network optimization. The IP67-rated enclosure withstands harsh field conditions across –40 °C to +55 °C, while integrated GPS synchronization and high-precision IQ capture enable accurate signal geolocation and time-stamped measurements. Dual interfaces
Gigabit Ethernet with embedded web server and SCPI command support - allow browser-based remote control via Chrome or Firefox, or integration with custom automation routines.
Technical Specifications
Frequency Range: 9 kHz to 6 GHz; 1 Hz tuning resolution
Sweep Speed: Up to 24 GHz/s
Instantaneous FFT Bandwidth: 20 MHz
Dynamic Range: >106 dB (normalized to 1 Hz BW)
Phase Noise: –99 dBc/Hz @ 10 kHz offset at 1 GHz
Frequency Accuracy: <±1.5 ppm; <±50 ppb with GPS High Accuracy Mode
IQ Capture: Block mode and streaming
IQ Time Stamping: GPS-synchronized, <9 nsec resolution for geolocation calculations
Measurements: Occupied bandwidth, channel power, spectrogram, signal strength
Power Consumption: <11 watts
Input Power: 11 VDC to 24 VDC
Operating Temperature: –40 °C to +55 °C
Enclosure: IP67 rated (dust-tight, water-resistant)
RF Input: 2, 4, or 6 port options available
Interfaces: Gigabit Ethernet, integrated web server, SCPI, integrated GPS receiver
Operating System: Linux
Key Features
Save on Event captures measurements only when user-defined thresholds are exceeded, minimizing storage overhead
Integrated GPS receiver synchronizes time and location data for interference source tracking
Web-based remote control eliminates need for dedicated software installations
SCPI compatibility enables integration into existing monitoring networks and custom applications
Typical Applications
Spectrum clearing and regulatory compliance operations
Interference detection and mitigation
Critical infrastructure spectrum protection
Government and military spectrum surveillance
Wireless network optimization and interference analysis
Compatibility & Integration
Web Browsers: Chrome and Firefox via integrated server
Remote Programming: SCPI commands for custom control applications
Vision™ Software: Optional integration for automated measurements, alarming, and signal source geolocation
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 9 kHz to 6 GHz | Voltage / Current Range: 11 VDC to 24 VDC input |
Anritsu MS27102A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu MS27102A. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Anritsu MS27102A price
This Anritsu MS27102A is listed at $1,679. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu MS27102A calibration cost
NIST-traceable calibration for the Anritsu MS27102A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
