Anritsu MS2830A
Anritsu Spectrum Analyzers. Accuracy: ±0.3 dB (typical), Dynamic Range: 168 dB, Bandwidth: 1 Hz to 10 MHz (spectrum analyzer).
- Model
- Anritsu MS2830A
- Calibration
- Available on request
- Price
- $8,500
- RFQ ref
- MS2830A
This unit
The Anritsu MS2830A is a spectrum and signal analyzer engineered for wireless communications testing across R&D, production, and maintenance environments. It delivers FFT-based time and frequency domain analysis with performance options spanning 9 kHz to 43 GHz, depending on model selection. Built-in measurement functions address channel power, occupied bandwidth, ACPR, spectral emission mask, spurious emissions, pulse power analysis, and frequency counting. The instrument supports modulation analysis across 3GPP LTE/LTE-Advanced, UMTS W-CDMA, EDGE, GSM, cdma2000, IEEE 802.11 variants, Bluetooth, ZigBee, P25, DMR, NXDN, and proprietary signals. Optional vector signal generation (VSG) extends capability to 120 MHz modulation bandwidth with up to 256 Megasamples onboard memory.
Technical Specifications Frequency Coverage
Models MS2830A-040: 9 kHz – 3.6 GHz
Models MS2830A-041: 9 kHz – 6 GHz
Models MS2830A-043: 9 kHz – 13.5 GHz
Models MS2830A-044: 9 kHz – 26.5 GHz
Models MS2830A-045: 9 kHz – 43 GHz Measurement Performance
Total Level Accuracy: ±0.3 dB (typical)
Dynamic Range: 168 dB
Amplitude Range: +30 dBm to −153 dBm
Resolution Bandwidth: 1 Hz to 10 MHz (spectrum analyzer); up to 31.25 MHz with options Analysis Bandwidth
Standard: 10 MHz
Optional upgrades: 31.25 MHz (MS2830A-005), 62.5 MHz (MS2830A-077), 125 MHz (MS2830A-078) Connectors
Type N for models to 13.5 GHz
Type K (2.92 mm) for 26.5 GHz and 43 GHz models
Key Features
Built-in calibration oscillator (300 kHz to 4 GHz) accounts for frequency response, linearity, and attenuator errors
10 peak markers with multi-marker and marker list capability
Limit line function for mask compliance testing
Optional vector signal generator with 64 or 256 Megasamples storage
Reduced power consumption versus prior generations
Typical Applications
LTE/LTE-Advanced device characterization
Wi-Fi (802.11a/b/g/j/n/p/ac) validation
P25, DMR, NXDN land mobile radio testing
Bluetooth and ZigBee protocol verification
Spectrum monitoring and spurious emission detection
Compatibility & Integration Optional VSG modules (MS2830A-020 for 3.6 GHz, MS2830A-021 for 6 GHz) enable vector modulation generation. Analog and vector modulation analysis available through optional software licenses. Noise figure measurement capability available through optional module.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 9 kHz to 43 GHz (base model MS2830A-045) |
| extendable to 110 GHz with external mixer | Power Range (dBm) | '-153 dBm/Hz DANL |
| +15 dBm TOI | Voltage / Current Range | 110 VA nominal (MS2830A-040) |
Anritsu MS2830A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu MS2830A. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Anritsu MS2830A price
This Anritsu MS2830A is listed at $8,500. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu MS2830A calibration cost
NIST-traceable calibration for the Anritsu MS2830A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
