Anritsu MS2850A – Spectrum Analyzer/Signal Analyzer
Anritsu Spectrum Analyzers. Accuracy: ±0.5 dB (DC to 4 GHz), Dynamic Range: >, Dynamic Range: -60 dBc (800 MHz–4.2 GHz).
- Model
- Anritsu MS2850A
- Calibration
- Available on request
- Price
- $24,000
- RFQ ref
- MS2850A
This unit
The Anritsu MS2850A is a spectrum and signal analyzer engineered for RF and microwave measurements in 5G, satellite, and advanced wireless communication systems. It combines wideband signal capture with real-time FFT analysis, delivering exceptional dynamic range and phase linearity across frequencies up to 44.5 GHz. The instrument captures and replays waveform data for time-varying frequency and phase analysis, supporting complex multi-carrier signal characterization.
Technical Specifications Frequency Coverage
MS2850A-047: 9 kHz to 32 GHz
MS2850A-046: 9 kHz to 44.5 GHz Analysis Bandwidth
Standard: 255 MHz
Optional Extensions: 510 MHz or 1 GHz Dynamic Performance
Amplitude Range: +30 dBm to -166 dBm
Amplitude Accuracy: ±0.5 dB (DC to 4 GHz)
Dynamic Range: >140 dB (28 GHz band)
Phase Noise: -123 dBc/Hz (10 kHz offset at 1 GHz)
DANL: -142 dBm/Hz (28 GHz, CW)
ADC Clipping Level: 0 dBm (28 GHz) Waveform Quality
Spurious Free Dynamic Range: -60 dBc (800 MHz–4.2 GHz); -70 dBc (4.2 GHz–44.5 GHz); -70 dBc (at 1 GHz Analysis Bandwidth)
Amplitude Flatness (1 GHz ABW, 28 GHz center): ±1.2 dB
Phase Flatness (1 GHz ABW, 28 GHz center): 5° peak-to-peak
EVM: <1% Resolution Bandwidth: 1 Hz to 10 MHz
Key Features
Simultaneous spectrum and FFT signal analysis with time-domain waveform capture
Waveform replay from internal memory (24-second capture at 100 MHz span example)
Spectrogram and time-varying frequency/phase displays
Microwave preselector bypass for low-loss operation
USB power sensor integration
System Integration Interfaces: USB, Ethernet, IEEE-488 (GPIB); optional PCIe/USB3.0 for high-speed data transfer Physical: 426 × 177 × 390 mm; 21 kg; 21.3 cm display (1024 × 768) Operating Environment: 0°C to +45°C; 500 VA power consumption Operating System: Windows 7 or Windows 10 IoT Enterprise LTSC2019 Optional Software: 5G Standard Measurement Software and Pre-Standard CP-OFDM Downlink measurement packages available
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 9 kHz to 32 GHz (MS2850A-047) |
| 9 kHz to 44.5 GHz (MS2850A-046) | Power Range (dBm) | '+30 dBm to -166 dBm |
Anritsu MS2850A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu MS2850A. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Anritsu MS2850A price
This Anritsu MS2850A is listed at $24,000. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu MS2850A calibration cost
NIST-traceable calibration for the Anritsu MS2850A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
