Anritsu MU100010A – Multirate Module, 10G For MT1000A Series Network Master Pro
The Anritsu MU100010A is a multirate module designed for use with the MT1000A Series Network Master Pro. It provides 10G testing capabilities for network performance analysis and verification.
- Model
- Anritsu MU100010A
- Calibration
- Available on request
- Price
- $4,500
- Status
- In stock
- RFQ ref
- MU100010A
This unit
The Anritsu MU100010A is a multirate transport module for the MT1000A Series Network Master Pro, enabling installation and maintenance testing across diverse communication networks from 1.5 Mbps to 10 Gbps. This module delivers comprehensive protocol support including Ethernet, OTN, Fibre Channel, eCPRI, SDH/SONET, and MPLS-TP, making it essential for mobile fronthaul and backhaul, carrier access, and metro and core network commissioning. Two ports operate simultaneously across all supported rates and interfaces.
Technical Specifications
Speed Range: 1.5 Mbps to 10 Gbps
Supported Protocols: Ethernet (up to 100 Gbps), OTN (up to OTU4 with multistage mapping and ODU Flex), Fibre Channel (up to 16 Gbps), eCPRI/RoE/CPRI/OBSAI, SDH/SONET, PDH/DSn, Synchronous Ethernet (SyncE), PTP (IEEE 1588 v2), MPLS-TP and PBB (up to 10 Gbps)
Physical Interfaces: 2 × RJ48, 2 × BNC Tx/Rx, 2 × Bantam Tx/Rx, 2 × RJ45, 2 × SFP+
Key Features
BER testing including CPRI/OBSAI interface, frame loss, and sequence error detection
RFC 2544 and Y.1564 Ethernet performance testing; RFC 6349 TCP throughput validation
Ethernet OAM support up to 100 Gbps with traffic generation at full line rate
Error and alarm detection, return delay time measurement, and link status monitoring
Frame capture and simultaneous bidirectional monitoring with IP channel statistics
OTN testing with client signals; eCPRI/IEEE1914.3 frame and latency testing
CPRI/OBSAI L1 and L2 layer testing
Service disruption measurements and Storage Area Networking (SAN) testing capability
Typical Applications
Mobile fronthaul and backhaul commissioning and inspection
Carrier access network deployment and troubleshooting
Metro and core network commissioning and maintenance
Multiprotocol transport validation across heterogeneous network environments
Compatibility & Integration
Host Platform: MT1000A Series Network Master Pro mainframe
Display: 9-inch (800 × 480 pixels) enhanced display with intuitive three-window GUI (SETUP, TEST, RESULTS)
Operating System: Linux with fast boot and stable operation
Remote Operation: Full multi-user remote access via MX100001A Software
Configuration: Requires protocol option(s) to enable specific test functionality
Anritsu MU100010A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu MU100010A. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Anritsu MU100010A price
This Anritsu MU100010A is listed at $4,500. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu MU100010A calibration cost
NIST-traceable calibration for the Anritsu MU100010A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
