Anritsu MU183040B – High Sensitivity ED Module: 28G/32G bit/s
Anritsu MU183040B,High-sensitivity ED module for 28G/32G bit/s signal detection, supporting optical communication systems requiring enhanced signal integrity, low-noise performance, and accurate waveform evaluation in high-speed test scenarios.
- Model
- Anritsu MU183040B
- Calibration
- Available on request
- Price
- $21,000
- Status
- In stock
- RFQ ref
- MU183040B
This unit
The Anritsu MU183040B is a high-sensitivity Error Detector (ED) module engineered for 28 Gbit/s and 32 Gbit/s signal analysis on the MP1800A Signal Quality Analyzer platform. Built for optical communications and high-speed digital interfaces requiring enhanced signal integrity, this module delivers receiver sensitivity and the fastest auto-adjust capability for threshold and phase optimization across multiple channels.
Technical Specifications
Bit-Rate Range: 2.4 Gbit/s to 28.1 Gbit/s (standard); 2.4 Gbit/s to 32.1 Gbit/s with Option-x01
Channel Configuration: 1, 2, or 4-channel modes with simultaneous multichannel measurement support
Receiver Sensitivity: 10 mV typical (single-ended, EYE Height)
Auto Adjust: Simultaneous optimization of BER voltage threshold and phase for up to 8 channels in under 1 second
Clock Recovery: Optional internal clock recovery module supports jitter tolerance testing for PHY devices with independent Tx/Rx clocks; required for Multi-Mode Fiber (MMF) measurements
Data Input: Accepts low-amplitude signals with constricted eye openings; compensates for transmission media losses in PCB traces, copper cables, and Active Optical Cables
Key Features
BER measurements up to 32.1 Gbit/s with extrapolation capability for low bit error rates (1E-12, 1E-15)
Processes degraded signals from backplanes, cables, and optical transmission media
Synchronized multi-channel operation for crosstalk and skew tolerance evaluation
Plug-in compatibility with MP1800A platform modules including PPG sources, jitter modulation sources, and emphasis filters
Typical Applications
100 GbE backplanes and cable systems
SERDES and CDR devices (CEI-25 G, CEI-28 G-VSR standards)
Active Optical Cable (AOC) validation (InfiniBand EDR)
Optical transceiver modules (CFP/CFP2/CFP4, QSFP+, 32 G Fibre Channel, OTU4)
TOSA/ROSA and Silicon Photonics device characterization
Modulator evaluation (EA, EML)
Jitter tolerance testing
Compatibility & Integration Designed as a dedicated module for the MP1800A Signal Quality Analyzer platform with full interoperability across the Anritsu MP1800A ecosystem.
Anritsu MU183040B — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu MU183040B. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Anritsu MU183040B price
This Anritsu MU183040B is listed at $21,000. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu MU183040B calibration cost
NIST-traceable calibration for the Anritsu MU183040B is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
