JDS Uniphase N530-0163
JDS Uniphase Bit Error Rate Testers (BERT).
- Model
- JDS Uniphase N530-0163
- Calibration
- Available on request
- Price
- $850
- Status
- In stock
- RFQ ref
- N530-0163
This unit
The JDS Uniphase N530-0163 TestPoint 10Gbps Module is a high-speed data transmission testing platform designed for telecommunications and data networking applications. This module delivers comprehensive protocol support across the 10 Gbps spectrum, including 10 Gigabit Ethernet (LAN/WAN), SONET/SDH BERT with PRBS injection into STS-192c/VC-4-64c, and optional 10 Gigabit Fibre Channel. It performs lower-layer PCS testing, RFC 2544 compliance validation, and multi-stream traffic simulation with advanced error monitoring and latency analysis.
Technical Specifications Supported Protocols & Rates
10 Gigabit Ethernet (10 GigE)
LAN and WAN testing
SONET/SDH
BERT with PRBS into STS-192c/VC-4-64c
10 Gigabit Fibre Channel (GFC) - licensed option
Generic Frame Procedure (GFP) - licensed option; GFP-F into OTU2 and GFP into STS-192c/VC-4-64c
Cisco High-Level Data Link Control (HDLC) - licensed option
8 Gbps and 10 Gbps Fibre Channel Forward Error Correction & Digital Wrapper Support
G.709 ODU2 at 10.037 Gbps
OTU2 at 10.709 Gbps
FEC at 11.049 Gbps, 11.095 Gbps, 11.270 Gbps, and 11.317 Gbps Interfaces
Optical: 10 Gigabit XFP modules or fixed optics for stressed receiver sensitivity (SRS) testing
Electrical Production Packages: N530-0163-PA1 (9.9G–10.5G) and N530-0163-PA2 (8.5G–11.3G)
Key Features
Multi-stream traffic simulation: 128 physical ports, 4096 logical ports (ExStreams)
Stream definitions: up to 4096 streams per transmission port
Error monitoring: FCS errors, frame length threshold detection, and frame loss analysis
Sequencing analysis: frame loss, out-of-order detection, duplicate frame identification
Latency measurements: minimum, maximum, and average in single-stream mode
Error insertion into transmit traffic
MAC filtering (8 entries), VLAN filtering, and 6-byte pattern filtering with offset control
Typical Applications
10 GigE LAN/WAN validation and compliance testing
SONET/SDH BERT characterization
Fibre Channel protocol validation
RFC 2544 performance benchmarking
Lower-layer physical layer and PCS testing
Compatibility & Integration The N530-0163 integrates into the TestPoint modular platform architecture, supporting both XFP optical modules and fixed optics configurations. Electrical production packages enable flexible deployment across carrier-grade and enterprise test environments.
JDS Uniphase N530-0163 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the JDS Uniphase N530-0163. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
JDS Uniphase N530-0163 price
This JDS Uniphase N530-0163 is listed at $850. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
JDS Uniphase N530-0163 calibration cost
NIST-traceable calibration for the JDS Uniphase N530-0163 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
