Agilent / Keysight N9320B RF Spectrum Analyzer, 9 kHz to 3 GHz

Agilent / Keysight N9320B RF Spectrum Analyzer, 9 kHz to 3 GHz,"Compact analyzer offering a wide frequency range up to 3 GHz for RF signal monitoring and analysis. Delivers essential measurement functions such as channel power, occupied bandwidth, and harmonic distortion. Suitable for general-purpose RF testing in wireless, EMI diagnostics, and electronics development."

Model
Agilent N9320B
Calibration
Available on request
Price
$6,296
RFQ ref
N9320B
View cart
Prefer to talk? Call +1 (484) 841-9341

This unit

The Agilent/Keysight N9320B is a portable RF spectrum analyzer covering 9 kHz to 3 GHz, purpose-built for signal monitoring, EMI diagnostics, and wireless communications development. Its compact form factor suits field deployment and lab environments alike, delivering measurement accuracy and sensitivity across a wide dynamic range.


Technical Specifications

Frequency Coverage

  • Overall range: 9 kHz to 3 GHz

  • AC-coupled operation: 100 kHz to 3 GHz

  • With preamp enabled: 1 MHz to 3.0 GHz Resolution & Video Bandwidth

  • RBW (-3 dB): 10 Hz to 1 MHz in 1-3-10 sequence steps

  • RBW accuracy: ±5% nominal

  • VBW (-3 dB): 1 Hz to 1 MHz in 1-3-10 sequence steps Amplitude Measurement Performance

  • Displayed average noise level (DANL) ranges from -90 dBm (9–100 kHz) to -148 dBm (10–500 MHz with preamp on)

  • Measurement range: +30 dBm to DANL (10 MHz–3 GHz, preamp off)

  • Input attenuator: 0 to 70 dB in 1 dB steps

  • Overall amplitude accuracy: ±1.5 dB (typical ±0.5 dB)

  • Level measurement uncertainty: ±1 dB (1–2 GHz), ±1.3 dB (2–3 GHz) Maximum Input Protection

  • Average continuous power: ≤ +37 dBm with ≥10 dB attenuation (3 minutes)

  • Peak pulse power: ≤ +50 dBm (< 10 μs pulse width, < 1% duty cycle, ≥40 dB attenuation)

  • DC voltage: 50 VDC maximum Frequency Response Flatness

  • 200 kHz–2.0 GHz: ±0.5 dB (preamp off, 10 dB attenuation)

  • 2.0–3.0 GHz: ±0.7 dB (preamp off, 10 dB attenuation)

  • 1 MHz–2.0 GHz: ±0.6 dB (preamp on, 10 dB attenuation)


Key Features



  • Selectable resolution bandwidth (10 Hz to 1 MHz) for detailed signal analysis

  • Dual-mode amplification: switchable preamp for low-level signal detection

  • Attenuation switching uncertainty of ±0.4 dB ensures repeatable measurements

  • Absolute amplitude accuracy: ±0.3 dB (preamp off), ±0.4 dB (preamp on)


Typical Applications



  • Wireless communications signal analysis and compliance testing

  • EMI/RFI troubleshooting in development and manufacturing

  • Field RF signal monitoring and spectrum surveillance

  • General-purpose bench and portable RF measurements

Specifications

ParameterValue
Frequency Range9 kHz to 3 GHz | Power Range (dBm): '-148 dBm to +13 dBm

Agilent N9320B — Repair & Calibration Service

Aumictech offers NIST-traceable calibration and repair for the Agilent N9320B. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.

Standard Cal
$450
Pass/fail cert + NIST sticker
Cal with Data
$650
Full NIST cert with measured values

Agilent N9320B price

This Agilent N9320B is listed at $6,296.38. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.

Agilent N9320B calibration cost

NIST-traceable calibration for the Agilent N9320B is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →