Abaco Systems / Ramix PMC-498 10baseT to 10base2 Ethernet Converter
Abaco Systems / Ramix Legacy / Obsolete Test Equipment. Ethernet converter, 10BaseT to 10Base2.
- Model
- Abaco Systems / Ramix PMC-498
- Calibration
- Available on request
- Price · starting from
- $1,050
- Status
- In stock
- RFQ ref
- PMC-498
This unit
The Abaco Systems / Ramix PMC-498 is a PCI Mezzanine Card (PMC) that converts between 10BaseT and 10Base2 Ethernet standards. This IEEE 1386-compliant module bridges legacy 10Base2 coaxial networks with modern 10BaseT twisted-pair infrastructure, making it essential for maintaining connectivity in mixed-generation network environments. The card incorporates 16 monitoring LEDs and dual rotary switches offering 256 configuration combinations for flexible deployment.
Read/writeable operation supports both data transfer and dynamic configuration management.
Technical Specifications
- Form Factor: PCI Mezzanine Card (PMC) / IEEE 1386 standard
- Ethernet Interfaces: 10BaseT and 10Base2
- Configuration Options: Two rotary switches (256 combinations)
- Monitoring Indicators: 16 LEDs
- Data Access Mode: Read/Writeable
- I/O Architecture: Front I/O supported
- Signaling Compatibility: 5V and 3.3V when used with compatible PMC adapters (e.g., Ramix PMC239/F)
- Protocol Support: Asynchronous enabled; Synchronous (1 mode)
Key Features
- Real-time status monitoring via integrated LED array for immediate fault identification and operational awareness
- Dual rotary switch configuration enables 256 distinct settings, supporting diverse network topologies and address schemes without requiring firmware updates
- Supports both 5V and 3.3V PCI signaling through appropriate host adapter selection
- Front panel I/O connectivity for accessible cabling in space-constrained applications
Typical Applications
- Network modernization projects requiring transparent bridging between legacy 10Base2 coaxial segments and 10BaseT deployments
- Industrial control systems and embedded network solutions maintaining 10Mbps Ethernet connectivity
- Avionics and defense platforms where backward compatibility with existing coax infrastructure is mandatory
Compatibility & Integration The PMC-498 operates within the IEEE 1386 PMC standard and integrates into any PCI-capable host system. Voltage adaptation between 5V and 3.3V signaling environments is achieved through compatible PMC carrier cards, such as the Ramix PMC239/F. The product is currently in Restricted Production Phase (RPP); availability through third-party EOL suppliers is recommended for procurement.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | 5V and 3.3V |
Abaco Systems / Ramix PMC-498 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Abaco Systems / Ramix PMC-498. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Abaco Systems / Ramix PMC-498 price
This Abaco Systems / Ramix PMC-498 is listed at $1,050. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Abaco Systems / Ramix PMC-498 calibration cost
NIST-traceable calibration for the Abaco Systems / Ramix PMC-498 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
