Abaco Systems / Ramix PMC663J Dual 10/100baseTX PMC Ethernet Controller
Dual 10/100baseTX PMC Ethernet Controller
- Model
- Abaco Systems / Ramix PMC663J
- Calibration
- Available on request
- Price · starting from
- $1,050
- Status
- In stock
- RFQ ref
- PMC663J
This unit
The Abaco Systems Ramix PMC663J is a dual 10/100BaseTX Ethernet controller implemented as a PCI Mezzanine Card (PMC). It delivers two independent 10/100 Mbit/s Ethernet ports with full-duplex operation at both speed tiers. A DMA engine paired with deep FIFO buffers sustains continuous full-bandwidth transfers while minimizing PCI overhead.
The onboard PCI/PCI bridge optimizes host interface performance and reduces bus loading. Auto-negotiation automatically configures each port to the highest available mode, including bandwidth and duplex settings. Direct interconnection between two PMC663 boards via crossover cable establishes a dedicated 400 Mbit/s full-duplex path; hub and switch configurations are also supported.
The card is well-suited for real-time deterministic networking and data paths.
Technical Specifications
- Manufacturer: Abaco Systems / Ramix
- Model: PMC663J
- Interface Type: PCI Mezzanine Card (PMC)
- PCI Compliance: PCI Rev. 2.1, IEEE 1386
- Ethernet Ports: 2 × 10/100BaseTX RJ45
- Speed per Port: 10 Mbit/s or 100 Mbit/s
- Operation Mode: Full-duplex at both 10 Mbit/s and 100 Mbit/s
- Internal Transfer Architecture: DMA engine with deep FIFO buffers
Key Features
- Hardware auto-negotiation with user-level control via driver
- PCI/PCI bridge for optimized host connectivity and reduced bus loading
- Point-to-point, hub, and switched configurations supported
- Dual-port operation independent on each port
Typical Applications
- real-time data interconnects
- Dedicated data paths between PMC-based systems
- Low-latency switched or direct-cabled networking in embedded platforms
Compatibility & Integration Drivers available for VxWorks, pSOS, LynxOS, Digital UNIX, HP-UX (10.x and 11.x), Solaris, and additional operating systems. Driver implementation integrates into host OS LAN protocol stacks, enabling full access to OS networking facilities. High-density card edge connector with RJ45 transition cable provides I/O connectivity.
Abaco Systems / Ramix PMC663J — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Abaco Systems / Ramix PMC663J. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Abaco Systems / Ramix PMC663J price
This Abaco Systems / Ramix PMC663J is listed at $1,050. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Abaco Systems / Ramix PMC663J calibration cost
NIST-traceable calibration for the Abaco Systems / Ramix PMC663J is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
