Kontron / ICS Advent SBC-SCPIII-VE-04 Single Board Computer

Kontron / ICS Advent Legacy / Obsolete Test Equipment.

Model
Kontron / ICS Advent SBC-SCPIII-VE-04
Calibration
Available on request
Price · starting from
$850
Status
In stock
RFQ ref
SBC-SCPIII-VE-04
View cart
Prefer to talk? Call +1 (484) 841-9341

This unit

The Kontron/ICS Advent SBC-SCPIII-VE-04 (Endeavor Plus VE) is a legacy single board computer engineered for industrial ISA-based systems. Built around the Intel 810E chipset, it accommodates Intel Pentium III FC-370 (500–850 MHz) or Celeron (333–533 MHz) processors via Socket 370, delivering deterministic processing with selectable CPU core/bus clock ratios from x2 to x8 across 66/100 MHz front side bus options. The board integrates graphics, optional dual Ethernet and SCSI controllers, and supports up to 1 GB SDRAM across two 168-pin DIMM sockets.

Technical Specifications Processor & Chipset

Intel Pentium III FC-370 (500–850 MHz) or Celeron (333–533 MHz)

Socket 370, Intel 810E chipset

FSB: 66/100 MHz; selectable CPU core/bus ratio x2 to x8

Integrated Intel 810E graphics controller with 4 MB VRAM Memory

Two 168-pin DIMM sockets supporting SDRAM (non-ECC, non-buffered)

Maximum capacity: 1 GB SDRAM Storage & I/O

Two IDE connectors (ATA/66 capable)

Optional AIC-7892 Ultra-160/m SCSI host adapter, 68-pin connector

DiskOnChip socket included

Two serial ports, one parallel port

Dual USB 1.1 ports

Optional 10/100 Base-T Ethernet (Intel 82559)

PS/2 keyboard and mouse connectors

VGA display connector BIOS & System

AMI BIOS with 4 Mbit Firmware Hub, 256 KB flash ROM (software-upgradeable)

Supports DMI, PnP, APM

Programmable watchdog timer: 0.5 sec./min. to 254.5 sec./min. (255 intervals)

Prefail detect with IRQ signal routing to IRQ10 or IRQ11

Onboard 3.0 V lithium CMOS battery with diode protection Power & Physical

+5 V @ 10 A (typical), +12 V @ 80 mA, −12 V @ 20 mA

ATX power control interface

Dimensions: 338.5 mm (L) × 122 mm (W)

Operating temperature: 0°–55°C

Key Features

ISA-only backplane compatibility for legacy system integration

Integrated 2D/3D graphics with dedicated VRAM

Dual IDE and optional Ultra-160/m SCSI expansion

Software-configurable watchdog with prefail detection

Flexible memory architecture (up to 1 GB SDRAM)

Typical Applications

Industrial control and automation systems

Legacy ISA-based embedded platforms

Real-time process monitoring and data acquisition

Compatibility & Integration Supported operating systems: Windows 95/98/NT/2000, Linux. The board's ISA-only backplane interface and Socket 370 processor design ensure compatibility with established industrial infrastructure while providing modern processing capability within tight thermal and power envelopes.

Specifications

ParameterValue
Frequency Range100 MHz, 66 MHz | Voltage / Current Range: '-12V @ 20mA, +12V @ 80mA, +5V @ 10A (typical)

Kontron / ICS Advent SBC-SCPIII-VE-04 — Repair & Calibration Service

Aumictech offers NIST-traceable calibration and repair for the Kontron / ICS Advent SBC-SCPIII-VE-04. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.

Standard Cal
$450
Pass/fail cert + NIST sticker
Cal with Data
$650
Full NIST cert with measured values

Kontron / ICS Advent SBC-SCPIII-VE-04 price

This Kontron / ICS Advent SBC-SCPIII-VE-04 is listed at $850. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.

Kontron / ICS Advent SBC-SCPIII-VE-04 calibration cost

NIST-traceable calibration for the Kontron / ICS Advent SBC-SCPIII-VE-04 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →