Spirent SmartBits SMB-600 with 2 x LAN-33200
Spirent Embedded Test Systems.
- Model
- Spirent SMB-600/LAN-33200
- Calibration
- Available on request
- Price
- $930
- Status
- In stock
- RFQ ref
- SMB-600/LAN-33200
This unit
The Spirent SmartBits SMB-600 with 2 × LAN-33200 modules is a portable network performance analysis system engineered for high-density Ethernet testing and validation. This two-slot chassis delivers comprehensive testing capabilities for network infrastructure, applications, and services across equipment manufacturers, evaluation labs, and telecommunications enterprises. PC-based control via Windows interface enables automated performance testing per RFC 1242 and RFC 2544 standards.
Technical Specifications
- Chassis: Spirent SmartBits SMB-600 with 2 module slots
- Control Interface: 10/100 Mbps Ethernet connection to host PC
- Software: SmartWindow, SmartLib, and SmartApplications (PC-based)
- Supported Standards: RFC 1242, RFC 2544
- Operating System: Windows 98, 2000, NT, XP
- Input Power: 100–240 VAC, 50–60 Hz (nominal 115 or 230 VAC)
- Dimensions: 12" W × 3.5" H × 12.5" D (30.8 cm W × 9 cm H × 32.1 cm D)
- Weight: 5.25 lbs (2.38 kg) fully loaded; 8.5 lbs (3.85 kg) shipping weight
- Operating Environment: 15°C to 40°C (59°F to 104°F); 20%–80% relative humidity with unimpeded chassis fan airflow
Key Features
- Portable design optimized for field and lab deployment
- Two-module configuration supports multiple Ethernet port densities
- Daisy-chaining capability: up to 512 SMB-600 units synchronously connected via multi-chassis extension units for large-scale testing
- PC control eliminates need for dedicated front-panel interfaces
Typical Applications
- Network equipment validation and acceptance testing
- ISP and telecom infrastructure performance analysis
- Ethernet switch and router qualification
- RFC-compliant throughput, latency, and frame loss measurement
Compatibility & Integration
- Compatible with Spirent SmartBits SMB-6000B chassis
- Host PC: IBM-compatible Pentium running Windows 98/2000/NT/XP
- Requires Ethernet card (10/100 Mbps), mouse, color monitor
- RS-232 straight-through cable required for initial configuration
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | 100–240 VAC, 50–60 Hz |
Spirent SMB-600/LAN-33200 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Spirent SMB-600/LAN-33200. Calibration covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Spirent SMB-600/LAN-33200 faults: power supply failure (cRIO-9073/9074), C-series slot connector wear, PXI chassis fan failure, GPIB interface failure on VXI controllers, BIOS/EEPROM corruption. NI CompactRIO most common faults are power supply failure on older cRIO-9073/9074 chassis and C-series module slot connector wear from repeated hot-swap cycles. PXI chassis fan failure is the most common wear item — chassis fans are field-replaceable. VXI embedded controllers most commonly develop EEPROM corruption and GPIB interface failure.
Spirent SMB-600/LAN-33200 price
This Spirent SMB-600/LAN-33200 is listed at $930. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Spirent SMB-600/LAN-33200 calibration cost
NIST-traceable calibration for the Spirent SMB-600/LAN-33200 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. Turnaround is 1 to 3 business days after receipt. See full calibration details →
