Curtiss-Wright / DY-4 SVME-179-0603 Single Board Computer
Curtiss-Wright / DY-4 VME Modules. Model: SVME-179-0603.
- Model
- Curtiss-Wright / DY-4 SVME-179-0603
- Calibration
- Available on request
- Price
- $2,400
- RFQ ref
- SVME-179-0603
This unit
The Curtiss-Wright/DY-4 SVME-179-0603 is a 64-bit single-board computer engineered for embedded systems in aerospace and defense environments. Built on PowerPC 750 or 7400 architecture, this MIL-rugged platform delivers processing with integrated VME connectivity and extensive I/O expansion capability.
Technical Specifications Processor & Memory Hierarchy
PowerPC 750 (up to 400 MHz) or PowerPC 7400 with AltiVec Technology
L2 Cache: 1 MB (750) or 2 MB (7400) with synchronous burst RAM and parity error detection
L2 Cache Bus: 133 MHz, 1.06 GBytes/sec peak data transfer rate
Main Memory: 64, 128, or 256 MB SDRAM with Error Checking and Correcting (ECC)
Flash Memory: Up to 48 MB, 64-bit wide direct memory-mapped
nvSRAM: 32 KB AutoStore
Serial EEPROM: 512 bytes Bus Architecture & VME Interface
64-bit PCI local bus with 264 Mbytes/sec peak data transfer rate
Tundra Universe II VME64 master/slave interface
Two IEEE P1386/1386.1 64-bit PMC sites at 33 MHz Connectivity & Peripherals
One 10/100BaseTX Ethernet port
Ultra SCSI: 8 or 16-bit Fast-20 (20 megatransfers per second)
Serial: Two EIA-232 ports; Two HDLC/SDLC-capable EIA-422/485 channels with optional DMA
Discrete Digital I/O: 12 bits TTL-compatible, individually programmable, state-change interrupts with edge selection
Timers: One 32-bit, three 24-bit general-purpose; three 16-bit system timers; watchdog with programmable timeout
Real Time Clock: Century/year/month/date/day/hour/minute/second registers with automatic +5V/+5V STDBY switchover; periodic, alarm, and update-ended interrupts
Four PCI DMA controllers Firmware Foundation Firmware includes debug monitor, non-volatile memory programmer, card support service routines, and Built-In Test with 95% fault coverage.
Key Features
Dual processor options for performance or extended instruction set flexibility
ECC protection on main memory and L2 cache for high-reliability operation
Flexible I/O architecture with PMC expansion slots for custom I/O modules
Multi-channel serial support with switchable drivers for multi-drop topologies
Hardware watchdog timer for autonomous system monitoring
Real-time clock with battery-backed operation and multiple interrupt conditions
Typical Applications Aerospace avionics, defense radar systems, military communications, signal processing platforms, and other harsh-environment embedded systems requiring VME backplane integration.
Compatibility & Integration VME64 backplane-compatible architecture enables straightforward integration into existing aerospace and defense systems. VxWorks BSP support available.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | '+5V, +5V STDBY |
Curtiss-Wright / DY-4 SVME-179-0603 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Curtiss-Wright / DY-4 SVME-179-0603. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Curtiss-Wright / DY-4 SVME-179-0603 price
This Curtiss-Wright / DY-4 SVME-179-0603 is listed at $2,400. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Curtiss-Wright / DY-4 SVME-179-0603 calibration cost
NIST-traceable calibration for the Curtiss-Wright / DY-4 SVME-179-0603 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →