Abaco Systems / VMIC VMIVME-7698-345 Celeron VME / VME64 Single-Board Computer
Abaco Systems / VMIC VME Modules. Frequency Range: 366 MHz.
- Model
- Abaco Systems / VMIC VMIVME-7698-345
- Calibration
- Available on request
- Price
- $750
- RFQ ref
- VMIVME-7698-345
This unit
The Abaco Systems VMIVME-7698-345 is a single-slot VME/VME64 single-board computer built around an Intel Celeron processor up to 366 MHz. It delivers 32-bit addressing with a 64-bit data bus, dual-ported DRAM to the VMEbus, and comprehensive I/O for control, data acquisition, and communication in industrial and embedded systems operating across extended temperature ranges.
Technical Specifications
Processor- Intel Celeron with MMX technology, up to 366 MHz
- 32-bit addressing, 64-bit data bus
- Superscalar architecture: three instructions per clock cycle
- Dynamic branch prediction
- 128 Kbyte L2 cache at processor clock frequency
- Separate instruction and data caches Memory
- One 144-pin SDRAM SODIMM, maximum 256 Mbyte
- 32 Kbyte battery-backed SRAM
- Up to 512 Mbyte IDE CompactFlash (optional)
- Dual-ported DRAM to VMEbus Graphics & Video
- 64-bit Intel AGP SVGA controller
- 2 Mbyte SGRAM Storage
- Ultra DMA/33 hard drive controller
- Floppy drive controller
- Flash mass storage with intelligent ATA (IDE) interface Networking & Serial
- Fast Ethernet: 10BaseT and 100BaseTX
- Two 16550-compatible serial ports
- PS/2-style keyboard and mouse connector VMEbus Interface
- VME64 modes: A32/A24/D32/D16/D08(EO)/MBLT64/BLT32
- VMEbus interrupt handler, interrupter, and system controller
- Byte-swapping hardware for little-endian and big-endian operation
- Enhanced bus error handling
- P2 I/O via PMC expansion site Timers
- Three programmable 16-bit timers (82C54 compatible)
- Software programmable, mapped in I/O space
Key Features
- Passive heat sink design with no moving parts
- Reprogrammable flash-based system and video BIOS
- PMC and PC
MIP expansion sites - Rugged construction meets MIL-STD-810G
- Operating temperature: -40°C to +85°C
- Single 3U VME form factor
Typical Applications Real-time control, multiprocessor systems, data logging, communications gateways, and embedded diagnostics in military, aerospace, and industrial environments.
Compatibility & Integration Fully VME64 compliant with standard P1/P2 connectors. Supports legacy and modern peripheral interfaces including IDE, Fast Ethernet, and serial devices.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 366 MHz |
Abaco Systems / VMIC VMIVME-7698-345 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Abaco Systems / VMIC VMIVME-7698-345. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Abaco Systems / VMIC VMIVME-7698-345 price
This Abaco Systems / VMIC VMIVME-7698-345 is listed at $750. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Abaco Systems / VMIC VMIVME-7698-345 calibration cost
NIST-traceable calibration for the Abaco Systems / VMIC VMIVME-7698-345 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
