Kontron / Thales / Cetia VMPC6a-450-128 PowerPC VME64 Single Board Computer

Kontron / Thales / Cetia VME Modules. Model: VMPC6a-450-128.

Model
Kontron / Thales / Cetia VMPC6a-450-128
Calibration
Available on request
Price
$2,100
RFQ ref
VMPC6a-450-128
View cart
Prefer to talk? Call +1 (484) 841-9341

This unit

The Kontron/Thales/Cetia VMPC6a-450-128 is a PowerPC VME64 single board computer engineered for industrial, defense, military, and aerospace applications requiring high reliability in harsh environments. Built around the PowerPC 750 processor running at 450 MHz, this board delivers 820 MIPS and achieves over 21 SPECint95 and 13 SPECfp95 per processor, supported by 1 MB of backside L2 cache with a dedicated 1:2 clock ratio bus.

Technical Specifications

Processor: PowerPC 750 at 450 MHz

Performance: 820 MIPS @ 400 MHz; >21 SPECint95; >13 SPECfp95

Memory: 128 MB on-board double-bank SDRAM with ECC (64, 256, 512 MB options available)

Cache: 1 MB backside L2 cache per processor with dedicated high-speed transfer bus

Flash Memory: 512 KB system flash + 1 MB system flash + up to 32 MB user flash

NVRAM: 8 KB for board parameters

Real-Time Clock: Battery-backed (standard on SA class; optional on RA/RC)

VMEbus: VME64 Extensions ANSI/VITA 1.1–1997 compliant; Master support for A16, A24, A32 addressing and D08(EO), D16, D16:UAT, D32, D32:BLT, D32:UAT, D64MBLT transfers; Slave A16 support

PCI Interfaces: Internal 32-bit PCI (Rev. 2.0); External 64-bit PCI (Rev. 2.0) at 33 or 66 MHz; 5V or 3.3V signaling (fixed at manufacturing)

Ethernet: 10/100 Mb/s LAN controller (10BASE-T/100BASE-TX)

Serial Ports: Two RS-232 at 115.2 Kb/s or two simplified serial channels

SCSI: SCSI-3 interface

PMC Site: One IEEE standard PCI Mezzanine Card slot

Temperature Operating: 0° to +55°C ambient air; Storage: -45° to +85°C

Cooling: Linear airflow ≥1.2 m/s recommended; conduction cooled variants available to 85°C

Processor Bus: Supports dual processor configuration at 100 or 133 MHz

Key Features

Single VME slot form factor

Four ruggedization levels: standard, extended, air convection cooled, conduction cooled

ALMA64 VME/PCI bridge with semaphore registers

MIL STD 810 environmental compliance

Typical Applications Industrial control systems, defense subsystems, military electronics, aerospace instrumentation, and real-time embedded systems requiring VMEbus integration and PCI expansion.

Compatibility & Integration Full compatibility with IEEE standard PCI Mezzanine Cards. Dual processor configuration support enables symmetric multiprocessing designs.

Specifications

ParameterValue
Voltage / Current Range5V or 3.3V (PCI signaling level, fixed at manufacturing)

Kontron / Thales / Cetia VMPC6a-450-128 — Repair & Calibration Service

Aumictech offers NIST-traceable calibration and repair for the Kontron / Thales / Cetia VMPC6a-450-128. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.

Standard Cal
$450
Pass/fail cert + NIST sticker
Cal with Data
$650
Full NIST cert with measured values

Kontron / Thales / Cetia VMPC6a-450-128 price

This Kontron / Thales / Cetia VMPC6a-450-128 is listed at $2,100. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.

Kontron / Thales / Cetia VMPC6a-450-128 calibration cost

NIST-traceable calibration for the Kontron / Thales / Cetia VMPC6a-450-128 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →