Acromag / Xembedded / Xycom XVME-653 VMEbus Pentium Processor Module
Acromag / Xembedded / Xycom VME Modules. Resolution: 1280 × 1024.
- Model
- Acromag / Xembedded / Xycom XVME-653
- Calibration
- Available on request
- Price
- $750
- RFQ ref
- XVME-653
This unit
The Acromag/Xembedded/Xycom XVME-653 is a single-slot VMEbus processor module built around an Intel 233 MHz Pentium CPU with MMX technology. It delivers PC-compatible computing within a double-high VME form factor, enabling real-time control, data acquisition, and embedded systems integration in industrial environments. The module combines onboard graphics, storage, and I/O connectivity with PCI-to-VMEbus bridging and optional carrier-module expansion.
Technical Specifications
Processor and Memory- CPU: Intel 233 MHz Pentium Processor with MMX Technology
- L2 Cache: 512 KB synchronous, pipeline architecture
- DRAM: Up to 256 MB fast-page or EDO DRAM
- DRAM Slots: 72-pin SIMMs with ECC or parity support Graphics
- Controller: PCI Local Bus SVGA with 64-bit internal graphics engine
- Video RAM: 2 MB VRAM
- Max Resolution: 1280 × 1024, 256 colors
- Output: 15-pin D-shell connector (front panel)
- Hardware BitBLT acceleration for GUI operations Storage and I/O
- IDE Controller: PCI Enhanced IDE with DMA
- Floppy Drive Controller: Integrated
- Flash Disk: Optional, up to 72 MB
- Ethernet: Intel 82558, 10/100 Mbit, 32-bit PCI bus mastering, auto-sensing (10BaseT/100BaseTX)
- Serial: Two 16550-compatible high-speed ports
- Parallel: One EPP/ECP port
- USB: One port
- Keyboard/Mouse: PS/2 style ports VMEbus Interface
- PCI-to-VMEbus bridge with DMA
- Multiple VME master and slave image support
- Block transfer and DMA for data operations
- Configurable hardware byte-swapping logic Physical and Environmental
- Form Factor: Single-slot, double-high VMEbus module
- Connectors: P1 and P2 VMEbus backplane; front panel SVGA, RJ-45, USB, serial, parallel, PS/2
- Operating Temperature: 0 to 50°C with 100 cfm airflow
- Non-operating Temperature: −45 to 85°C
- Humidity: 5% to 95% at 60°C, non-condensing
Key Features
- 512 KB L2 pipeline cache for sustained instruction throughput
- Hardware graphics acceleration via 64-bit BitBLT engine
- Dual Ethernet (10/100 Mbit) for network-dependent real-time tasks
- PCI-based DMA for VME block transfers without CPU overhead
- Optional flash storage up to 72 MB
Compatibility & Integration The XVME-653 interfaces with Xycom Automation modular I/O carrier modules (XVME-976), which accept PMC, PC/104, short ISA, or PCI expansion modules. Power is supplied via the VMEbus backplane connectors.
Acromag / Xembedded / Xycom XVME-653 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Acromag / Xembedded / Xycom XVME-653. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Acromag / Xembedded / Xycom XVME-653 price
This Acromag / Xembedded / Xycom XVME-653 is listed at $750. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Acromag / Xembedded / Xycom XVME-653 calibration cost
NIST-traceable calibration for the Acromag / Xembedded / Xycom XVME-653 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →