Acromag / Xembedded / Xycom XVME-661 VMEbus Pentium III Low-Power Processor Module
The Acromag/Xembedded/Xycom XVME-661 is a VMEbus Pentium III Low-Power Processor Module designed for industrial applications. It features a low-power Pentium III processor, VMEbus interface, and rugged design for reliable performance in harsh environments. Ideal for real-time control, data acquisition, and embedded computing tasks.
- Model
- Acromag / Xembedded / Xycom XVME-661
- Calibration
- Available on request
- Price
- $750
- RFQ ref
- XVME-661
This unit
The XVME-661 is a 6U VMEbus processor module built around an Intel Pentium III low-power processor operating at 700 MHz with a 100 MHz frontside bus and 256 KB L2 cache. Designed for industrial embedded computing, real-time control, and data acquisition in demanding environments, this module combines CPU performance with integrated graphics, dual Ethernet controllers, and flexible I/O expansion via a single PMC site.
Technical Specifications
Processor- Intel Pentium III low-power processor
- CPU Speed: 700 MHz
- Frontside Bus: 100 MHz
- L2 Cache: 256 KB on-chip Memory
- SDRAM: Up to 256 MB
- Configuration: One 144-pin SODIMM Graphics Controller
- 64-bit AGP graphics controller with 4 MB SDRAM
- Maximum resolution: 1600×1200 at 64K colors or 1280×1024 at 16 million colors
- Video output: 15-pin D shell front panel connector VMEbus Interface
- Tundra Universe IID PCI-to-VMEbus bridge
- IEEE 1014 compliant
- Multiple VME master and slave images with block transfer and DMA capability
- Programmable hardware byte-swapping Storage
- IDE CompactFlash Type I/II site
- Optional hard drive/floppy via XVME-977 or hard drive/CD via XVME-979 Networking
- Dual Intel 82559ER 10 Base-T/100 Base-TX Ethernet controllers
- 32-bit PCI bus mastering, up to 100 Mbps per port
- Autosensed transfer rate with front panel LED indication I/O Expansion
- One 32-bit PMC site with electrical isolation
- Serial, parallel, USB, and keyboard/mouse ports via optional XVME-974 breakout module
- PCI EIDE support
Key Features
- Low-power Pentium III processor minimizes thermal load in VME backplane applications
- Tundra bridge architecture enables block data transfers
- Integrated dual Ethernet for network-centric embedded systems
- Flexible PMC expansion without requiring external carrier boards
- Optional I/O carrier modules extend functionality to USB, serial, parallel, and storage interfaces
Typical Applications
- Real-time industrial control systems
- VMEbus-based data acquisition platforms
- Embedded computing in harsh field environments
- Network-connected instrumentation and monitoring
Compatibility & Integration The XVME-661 integrates with standard VMEbus backplanes and supports optional expansion modules including the XVME-976 I/O carrier (PMC, PC/104, PCI, short ISA compatibility), XVME-977 storage module, and XVME-979 CD drive module.
Acromag / Xembedded / Xycom XVME-661 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Acromag / Xembedded / Xycom XVME-661. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Acromag / Xembedded / Xycom XVME-661 price
This Acromag / Xembedded / Xycom XVME-661 is listed at $750. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Acromag / Xembedded / Xycom XVME-661 calibration cost
NIST-traceable calibration for the Acromag / Xembedded / Xycom XVME-661 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →