Keithley 2200-32-3 – Power Supply, 32 Volts, 3 Amps
Keithley DC Power Supplies. Accuracy: 0.03%, Accuracy: 0.05%, Resolution: 1mV.
- Model
- Keithley 2200-32-3
- Calibration
- Available on request
- Price
- $675
- Status
- In stock
- RFQ ref
- 2200-32-3
This unit
The Keithley 2200-32-3 is a single-channel programmable DC power supply delivering 0V to 32V at 0A to 3A with 96W maximum output. Built for benchtop and automated test system integration, it operates as both a constant voltage and constant current source. The unit features a vacuum fluorescent dual-line display showing programmed and actual values simultaneously, remote sensing for accurate load voltage compensation, and 40 setup memories for configuration recall. List mode capability enables creation of repeatable test sequences with up to 80 steps per list, supporting up to seven independent lists. Each list step defines voltage, current limits, and duration for continuous cycling. Protection circuitry safeguards the Device Under Test from damage. A floating voltage rating up to 100V (DC + peak AC) relative to earth ground accommodates diverse measurement configurations.
Technical Specifications Electrical Output
Voltage range: 0V to 32V
Current range: 0A to 3A
Maximum power: 96W
Voltage setting accuracy: 0.03%
Current setting accuracy: 0.05%
Voltage resolution: 1mV
Current resolution: 0.1mA
Setting change response time: <10 ms typical; <35 ms rise/fall to within 75mV from 1V to 11V transitions at 1A load Power Requirements
Input voltage (110V AC): 99 VRMS to 132 VRMS
Input voltage (220V AC): 198 VRMS to 264 VRMS
Frequency: 50/60 Hz
Power consumption: 250 VA
Key Features
Dual-line display with real-time programmed/actual readout
Remote sensing for load-point voltage compensation
40 saved setups for instant configuration loading
List mode with up to 80 steps per sequence (7 lists maximum)
Floating output to 100V DC + peak AC relative to ground
GPIB and USB interfaces for remote control and integration
Typical Applications Electronic component testing, power circuit validation, automated manufacturing test sequences, laboratory prototyping, and device characterization requiring programmable voltage and current sourcing.
Compatibility & Integration GPIB and USB connectivity enable integration with automated test frameworks and remote operation. Rear-panel output terminals duplicate front-panel connections. Remote sense lines support high-accuracy load regulation across extended cable runs.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | 0A to 3A |
| Input | 99-132 VRMS (110V setting) or 198-264 VRMS (220V setting), 0V to 32V |
Keithley 2200-32-3 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Keithley 2200-32-3. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Keithley 2200-32-3 price
This Keithley 2200-32-3 is listed at $675. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Keithley 2200-32-3 calibration cost
NIST-traceable calibration for the Keithley 2200-32-3 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
