Anritsu 37247A
Anritsu Vector Network Analyzers. Frequency Range: ** 40 MHz to 20 GHz, Dynamic Range: ** Defined as the ratio of maximum signal level at, Dynamic Range: ** Defined as the ratio of power incident on Port.
- Model
- Anritsu 37247A
- Calibration
- Available on request
- Price
- $11,500
- RFQ ref
- 37247A
This unit
The Anritsu 37247A is a vector network analyzer delivering S-parameter measurements, impedance analysis, and time-domain response characterization across 40 MHz to 20 GHz. Built for RF and microwave component validation in aerospace, defense, telecommunications, and R&D environments, the instrument combines dynamic range performance with flexible calibration methods and multiple error correction models.
Technical Specifications Frequency Range: 40 MHz to 20 GHz Output Power Level: +10 dBm to -85 dBm Harmonics: Less than -35 dBc at maximum rated power Receiver Dynamic Range: Defined as the ratio of maximum signal level at Port 2 for 0.1 dB compression to noise floor at Port 2 System Dynamic Range: Defined as the ratio of power incident on Port 2 in a through line connection to noise floor at Port 2 (forward measurements only) Noise Performance: Less than 0.03 dB and less than 0.4° peak-to-peak variation in 1 kHz IF bandwidth to 20 GHz Data Points: Maximum of 1601 Standard Connectors: K (2.92 mm); GPC-7, Type N, 3.5 mm, and others available via converters or options
Key Features
Two-port S-parameter measurements in the frequency domain
Smith Chart display for impedance and admittance analysis
Optional High Speed Time (Distance) Domain capability
Group delay measurement with range dependent on phase change and frequency point aperture
SWR and Power Out measurements
Multiple calibration methods: OSL/SOLT, InstaCal, FlexCal, LRL/LRM, AutoCal, and Adapter Removal Calibration
Six built-in calibration methods with vector error correction
Time or distance reference plane setting with automatic electrical length compensation
Six markers
Typical Applications Component characterization, impedance matching analysis, transmission line evaluation, and system response validation in RF and microwave design
Compatibility & Integration Test port converters enable connection to alternative connector types. Reference plane automation supports various measurement geometries without manual recalibration.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 40 MHz to 20 GHz | Power Range (dBm): '+10 dBm to -85 dBm |
Anritsu 37247A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu 37247A. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Anritsu 37247A price
This Anritsu 37247A is listed at $11,500. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu 37247A calibration cost
NIST-traceable calibration for the Anritsu 37247A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
