Advantest R3765B Network Analyzer
Advantest Vector Network Analyzers. Frequency Range: 40 MHz to 3.8 GHz, Dynamic Range: 100 dB maximum.
- Model
- Advantest R3765B
- Calibration
- Available on request
- Price
- $3,470
- RFQ ref
- R3765B
This unit
The Advantest R3765B is a benchtop vector network analyzer engineered for precise S-parameter and impedance characterization of RF and microwave components across 40 MHz to 3.8 GHz. It delivers complex transmission and reflection measurements on two-port devices with 100 dB dynamic range and -100 dBm minimum displayed average noise level. The instrument combines a built-in signal source with integral receiver, 1 Hz frequency resolution, and 0.15 ms sweep speed per test point to enable rapid, accurate network parameter assessment.
Technical Specifications
- Frequency Range: 40 MHz to 3.8 GHz
- Signal Source: Integral; 1 Hz resolution; 0.002% frequency accuracy
- Output Power: 0.0000158489319246111 W to 5.01187 mW; 0.01 dB resolution; ±0.5 dB accuracy
- Source Impedance: 50 Ω
- Receiver: 1 channel (R3765B configuration); 40 MHz to 3.8 GHz
- Dynamic Range: 100 dB maximum
- Minimum Displayed Average Noise Level: -100 dBm
- Maximum Input Level: 0 dBm
- Measurement Speed: 0.15 ms per test point
- Form Factor: Benchtop; 424 mm width
Key Features
- Simultaneous four-diagram, eight-trace display on TFT color LCD
- Built-in SWR bridge and electronic attenuator
- T-R parameter measurement capability
- Programmable sweep function with limit-line evaluation
- Built-in BASIC controller for autonomous test execution
- Group delay measurement support
Typical Applications
- S-parameter characterization of two-port RF/microwave devices
- Impedance and reflection coefficient analysis
- Component transmission and reflection assessment
- Network parameter trending and evaluation
Compatibility & Integration
- SCPI-compatible programming interface
- IEC/IEEE bus for external instrument control
- RS232 connectivity to peripheral devices
- Floppy disk storage for test programs and instrument configurations
- Type-N (f) input connectors
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 40 MHz to 3.8 GHz | Power Range (dBm): '-100 dBm to 0 dBm |
Advantest R3765B — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Advantest R3765B. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Advantest R3765B price
This Advantest R3765B is listed at $3,470. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Advantest R3765B calibration cost
NIST-traceable calibration for the Advantest R3765B is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
