IXI Technology / Sabtech Industries 40-00037-01 Swift PCI NTDS Serial Type E Interface Module
IXI Technology / Sabtech Industries Embedded Test Systems. Channels: ** Independent NTDS Sink and Source (simultaneous, Resolution: ** 125 ns per input word.
- Model
- IXI Technology / Sabtech Industries 40-00037-01
- Calibration
- Available on request
- Price
- $1,650
- Status
- In stock
- RFQ ref
- 40-00037-01
This unit
The IXI Technology / Sabtech Industries 40-00037-01 Swift PCI NTDS Serial Type E Interface Module is a MIL-STD-1397C Type D/E compliant PCI interface card engineered for full-duplex 32-bit NTDS data transfers between commercial and military systems. Independent NTDS Sink and Source channels support simultaneous bidirectional communication via Interrupt, Programmed I/O, and Direct Memory Access operation modes. FPGA-based architecture enables in-field reprogramming and extends component lifecycle.
Technical Specifications
Model: 40-00037-01
Bus Interface: PCI
Protocol Compliance: MIL-STD-1397C Type D or E
Data Transfer: Full-duplex 32-bit NTDS
Operation Modes: Interrupt, Programmed I/O (PIO), Direct Memory Access (DMA)
Channels: Independent NTDS Sink and Source (simultaneous full-duplex)
Architecture: Field Programmable Gate Array (FPGA)
Time Stamp Resolution: 125 ns per input word
Time-out Increments: 10 µs or 1 ms selectable
Key Features
Separate or combined data and command word input buffers with stopping logic
Concurrent data and command output buffer operation
Single-word and burst-mode transmission for NTDS Type E
Passive tap mode for non-intrusive monitoring and data capture
Software-selectable time stamping across active and passive communications
Time stamp synchronization across multiple interfaces
Independent word counters and time-outs for command/information words and data words
Configurable time-out start (operation initiation or first-word transfer)
Full implementation of MIL-STD-1397C System Integrity Features (SIF)
Typical Applications
Naval combat systems and defense network integration
Military serial data acquisition and command distribution
Passive monitoring of NTDS communication networks
Real-time multi-interface synchronization in shipboard environments
Compatibility & Integration Software compatibility with other Swift family boards (PMC and cPCI versions) supports system migration and mixed-board deployments without firmware redesign.
IXI Technology / Sabtech Industries 40-00037-01 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the IXI Technology / Sabtech Industries 40-00037-01. Calibration covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common IXI Technology / Sabtech Industries 40-00037-01 faults: power supply failure (cRIO-9073/9074), C-series slot connector wear, PXI chassis fan failure, GPIB interface failure on VXI controllers, BIOS/EEPROM corruption. NI CompactRIO most common faults are power supply failure on older cRIO-9073/9074 chassis and C-series module slot connector wear from repeated hot-swap cycles. PXI chassis fan failure is the most common wear item — chassis fans are field-replaceable. VXI embedded controllers most commonly develop EEPROM corruption and GPIB interface failure.
IXI Technology / Sabtech Industries 40-00037-01 price
This IXI Technology / Sabtech Industries 40-00037-01 is listed at $1,650. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
IXI Technology / Sabtech Industries 40-00037-01 calibration cost
NIST-traceable calibration for the IXI Technology / Sabtech Industries 40-00037-01 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. Turnaround is 1 to 3 business days after receipt. See full calibration details →
