HP / Agilent 4339A High Resistance Meter
The HP/Agilent 4339A is a high resistance meter designed for accurate measurement of high resistance values. It features a wide measurement range, high resolution, and various test fixtures to accommodate different components and materials. Ideal for quality control, research, and development applications requiring precise resistance measurements.
- Model
- HP / Agilent 4339A
- Calibration
- Available on request
- Price
- $1,260
- Status
- In stock
- RFQ ref
- 4339A
This unit
The HP/Agilent 4339A High Resistance Meter is a precision instrument designed for accurate measurement of high resistance values and low currents across a range exceeding 16 decades. It delivers stable, safe measurements essential for materials characterization, semiconductor device analysis, and electronic component testing. The meter supports multiple measurement parameters
DC resistance, DC current, surface resistivity, and volume resistivity - with test voltages up to 1000 Vdc and programmable current compliance settings from 0.5 mA to 10 mA.
Technical Specifications
- Resistance Range: 1 × 10³ Ω to 1.6 × 10¹⁶ Ω
- Current Range: 60 fA to 100 µA
- Test Voltage: 0 to 1000 Vdc with 100 mV steps (0–200 V) and 1 V steps (200–1000 V)
- Maximum Current: 10 mA (< 100 V), 5 mA (< 250 V), 2 mA (< 500 V), 1 mA ( 42 Vdc)
- Charge-measure-discharge test sequences with integrated resistivity calculations
- Mathematical functions for deviation and percent deviation analysis
- Multiple trigger modes: internal, external, manual, and HP-IB
- Compact form factor: 4 × 13 × 21 in, 9 lbs
Typical Applications Materials characterization, semiconductor device parameter extraction, high-impedance component verification, and surface and volume resistivity measurements in production and laboratory environments.
Compatibility & Integration Works with HP 16008B Resistivity Cell, HP 16339A Test Fixture, and HP 16117B/C Test Leads for enhanced measurement capability.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | 0-1000 Vdc, 60 fA to 100 µA |
HP / Agilent 4339A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the HP / Agilent 4339A. Calibration covers impedance magnitude accuracy at 100 Hz, 1 kHz, 10 kHz, and 100 kHz, dissipation factor (D) and quality factor (Q) accuracy, phase angle accuracy, open and short compensation verification, and cable length compensation. HP/Keysight 4284A additionally verified at 1 MHz.. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common HP / Agilent 4339A faults: GPIB interface board failure, display failure, guard terminal switch contact wear, oscillator calibration drift on older analog bridges. HP 4284A and 4285A most common faults are HPIB interface board failure and display contrast loss. The internal oscillator and vector measurement circuits are highly stable and rarely fail. Wayne Kerr and GenRad bridge instruments may develop switch contact wear on decade resistance/capacitance dials.
HP / Agilent 4339A price
This HP / Agilent 4339A is listed at $1,259.8. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
HP / Agilent 4339A calibration cost
NIST-traceable calibration for the HP / Agilent 4339A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers impedance magnitude accuracy at 100 Hz, 1 kHz, 10 kHz, and 100 kHz, dissipation factor (D) and quality factor (Q) accuracy, phase angle accuracy, open and short compensation verification, and cable length compensation. HP/Keysight 4284A additionally verified at 1 MHz.. Turnaround is 1 to 3 business days after receipt. See full calibration details →
