Anritsu 54169A
The Anritsu 54169A is a test set designed for use with Anritsu network analyzers. It facilitates accurate S-parameter measurements of active devices. This test set enhances the capability of network analyzers for comprehensive device characterization.
- Model
- Anritsu 54169A
- Calibration
- Available on request
- Price
- $7,500
- Status
- In stock
- RFQ ref
- 54169A
This unit
The Anritsu 54169A is a scalar network analyzer purpose-built for characterizing active devices including amplifiers and filters across 10 MHz to 40 GHz. The instrument combines an integral signal source with dual receiver channels, delivering 71 dB dynamic range and crystal-based frequency stability at 0.00001% accuracy. Two independent receiver channels enable simultaneous measurements of transmission and reflection parameters with the analyzer's 50 Ω output impedance. Maximum input handling reaches 16 dBm, supporting both bench and production test environments.
Technical Specifications
Frequency Range: 10 MHz to 40 GHz
Source Frequency Resolution: 100 kHz
Source Frequency Accuracy: 0.00001%
Output Impedance: 50 Ω
Receiver Channels: 2
Dynamic Range: 71 dB (minimum and maximum)
Maximum Input Level: 16 dBm
Reference Source: Crystal-based
Data Storage: Floppy disk drive with 13 test pattern capacity; NOVRAM backup included
Programmability: GPIB
Form Factor: Benchtop
Key Features
Transmission gain/loss measurements with fast, accurate execution
Group delay and relative group delay characterization (optional software)
Return loss and SWR measurements with high directivity autotester capability
Distance-to-fault measurements for field testing (optional software)
Low source harmonics and precision return loss for enhanced measurement confidence
Built-in automation with fast recall mode for rapid test procedure sequencing
Sophisticated limit line controls with automated bandwidth search functions
Power measurement capability across the 10 MHz–40 GHz band
Typical Applications
Production testing and characterization of active RF devices
Filter and amplifier validation across microwave frequencies
Field troubleshooting and cable fault localization
Transmission line and component SWR assessment
Compatibility & Integration The 54169A pairs with Anritsu 5607V50 RF detectors and accepts external 60 dB step attenuators (Hewlett Packard 8495B/8495D, 0–26.5 GHz) for systems without internal attenuation. Precision adapters convert RF output to N female connectors for test point integration.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 10 MHz to 40 GHz | Power Range (dBm): '-16 dBm (maximum input) |
Anritsu 54169A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu 54169A. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Anritsu 54169A price
This Anritsu 54169A is listed at $7,500. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu 54169A calibration cost
NIST-traceable calibration for the Anritsu 54169A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
