Agilent/Keysight 54201A
Agilent / Keysight Digital Oscilloscopes. Bandwidth: 300 MHz, Bandwidth: 50 MHz, Sample Rate: 200 Megasamples/second (MSa/s).
- Model
- Agilent / Keysight 54201A
- Calibration
- Available on request
- Price
- $4,500
- Status
- In stock
- RFQ ref
- 54201A
This unit
The Agilent/Keysight 54201A is a two-channel digitizing oscilloscope engineered for precise signal capture and waveform analysis across repetitive and single-shot measurement scenarios. It delivers 300 MHz repetitive bandwidth and 50 MHz single-shot bandwidth with dual 200 MSa/s digitizers, enabling detailed characterization of transient and periodic signals in electronics testing, troubleshooting, and research environments.
Technical Specifications
- Channels: 2
- Repetitive Bandwidth: 300 MHz
- Single-Shot Bandwidth: 50 MHz
- Sample Rate: 200 Megasamples/second (MSa/s)
- Display Modes: Infinite persistence, envelope, average, accumulate, connect-the-dots
- Waveform Math: Ch1 + Ch2, Ch1 − Ch2
- Operating Temperature (Recommended): +20 to +35°C
- Operating Humidity (Recommended): 20% to 80% non-condensing
Key Features
- Automatic measurements of waveform parameters with user-defined thresholds
- Time and voltage cursors for measurements on live and stored waveforms
- Pre-trigger display and holdoff-by-events triggering
- Post-capture data interpolation for single-shot signals
- Average mode for signal-to-noise ratio improvement on repetitive waveforms
- Envelope mode for worst-case analysis of repetitive events
- Auto-scaling of input signals
- ECL and TTL preset levels for digital signal viewing
- Save and recall of front panel setups
- Built-in 50 ohm switchable inputs (54201A/D models)
- Configuration menu for instrument status and setup assistance
Interfaces & Control
- HP-IB programmability for all front panel controllable parameters
- Waveform data output
- One-button hardcopy to HP-IB printers and plotters
Compatibility & Integration HP-IB remote control operation supported. The Keysight 54201A and 54201D are no longer sold by Keysight; documentation is provided for reference only.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | DC to 300 MHz (repetitive) |
| DC to 50 MHz (single-shot) | Voltage / Current Range | ±40 V maximum safe input (1 MΩ coupling) |
Agilent / Keysight 54201A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Agilent / Keysight 54201A. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Agilent / Keysight 54201A price
This Agilent / Keysight 54201A is listed at $4,500. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Agilent / Keysight 54201A calibration cost
NIST-traceable calibration for the Agilent / Keysight 54201A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
