HP / Agilent 54520C 2 Channel, 1 GSa/s Color Digitizing Oscilloscope
HP / Agilent Digital Oscilloscopes. Bandwidth: ** 500 MHz analog, Resolution: ** 8-bit.
- Model
- HP / Agilent 54520C
- Calibration
- Available on request
- Price
- $806
- Status
- In stock
- RFQ ref
- 54520C
This unit
The HP/Agilent 54520C is a 2-channel digitizing oscilloscope delivering 500 MHz analog bandwidth and real-time sampling to 1 GSa/s. Purpose-built for high-speed signal capture and analysis, this instrument combines a color flat-panel TFT display with sophisticated triggering architecture and automated measurement capabilities. The 32 K acquisition memory per channel supports sequential single-shot acquisition for capturing successive transient events without dead time, while 400 Kbytes of sequential capture storage accommodates extended waveform sequences. Peak detect resolution reaches 1 ns for accurate glitch identification.
Technical Specifications
Bandwidth: 500 MHz analog, 2 channels
Sampling Rate: Up to 1 GSa/s real-time
Acquisition Memory: 32 K per channel
Vertical Resolution: 8-bit
Peak Detect: 1 ns
Sequential Capture Storage: Up to 400 Kbytes of waveform data
Waveform Storage: 4 nonvolatile, 2 pixel (volatile), and segmentable memory for failure analysis and sequential single-shot events
Power Requirements: 115/230 Vac, –25% to +15%, 48 to 440 Hz, 350 VA max
Key Features
Triggering modes: edge, pattern, glitch, time-qualified pattern, line, state event-delayed, time-delayed, and TV (NTSC, PAL)
Time-delayed triggering for precise event isolation
Standard FFT for spectral analysis
Autoscale function for automatic vertical, time base, and trigger level configuration
Automatic waveform measurements
Built-in 3.5" DOS-compatible floppy disk drive
Waveform and setup storage in TIFF, PCX, and EPS formats
Color flat-panel TFT LCD display
Typical Applications High-speed digital signal characterization, transient capture, sequential event analysis, and spectral measurement across telecommunications, instrumentation, and embedded systems development.
Compatibility & Integration Supports HP 1144A active probe (800 MHz bandwidth, 2 pF input capacitance, 1 MΩ input resistance) and HP 1145A two-channel active probe (750 MHz bandwidth, 2 pF input capacitance). Remote programming via standard oscilloscope commands documented in the Programmer's Reference. Firmware revision 2.XX.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | –25% to +15%, 115/230 Vac, 350 VA MAX, 48 to 440 Hz |
HP / Agilent 54520C — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the HP / Agilent 54520C. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
HP / Agilent 54520C price
This HP / Agilent 54520C is listed at $806.2. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
HP / Agilent 54520C calibration cost
NIST-traceable calibration for the HP / Agilent 54520C is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
