Anritsu 560-7S50-2

The Anritsu 560-7S50-2 is a precision RF detector engineered for integration with Anritsu scalar network analyzers and high-frequency measurement systems. Built around zero-biased Schottky diodes, it delivers accurate power detection across the RF and microwave spectrum for applications ranging from communication system calibration to radar and component testing.

Technical Specifications Measurement Range: −55 dBm to +16 dBm

Maximum Input Power: +20 dBm (100 mW). Exceeding this rating causes permanent damage to internal components. Frequency Range: 10 MHz to 26.5 GHz Characteristic Impedance: 50 Ohms Input Connector: WSMA (male) Return Loss Performance:

15 dB at frequencies below 0.04 GHz

22 dB at frequencies below 8 GHz

17 dB at frequencies below 18 GHz

14 dB at frequencies below 26.5 GHz Frequency Response Flatness:

±0.5 dB at frequencies below 18 GHz

±1.25 dB at frequencies below 26.5 GHz Compression Onset:

10 dBm below 0.05 GHz

15 dBm below 1 GHz

20 dBm below 1.2 GHz

Key Features

Zero-biased Schottky diode architecture for low-noise detection

Wide dynamic range spanning −55 dBm to +16 dBm

Flat response across extended bandwidth with controlled compression characteristics

Rugged 50 Ohm matched design with excellent return loss

Field-replaceable detector diode modules (except model 560-7VA50)

Typical Applications Power measurement and RF signal detection in scalar network analysis, communication system verification, radar component testing, and equipment calibration across microwave frequencies.

Compatibility & Integration Designed for use with Anritsu Model 56100A Scalar Network Analyzers and Series 541XXA, 540XXA, and 54XXA Scalar Measurement Systems. Also compatible with Site Master and Cable Mate Series Personal SWR/RL and Fault Location Testers for power measurement functions. Connector Compatibility: Verify mating connector pin depth using an Anritsu Pin Depth Gauge or equivalent to prevent connector damage. Protect the detector from mechanical shock and excessive power input to maintain service life and prevent permanent damage.