Chroma 62006P Programmable DC Power Supply 300V 8A

The Chroma 62006P-300-8 is a 600W programmable DC power supply from the 62000P Series, designed for automated test equipment (ATE) integration and testing. This series offers a constant power operating envelope, allowing for a wide range of voltage and current combinations within the power limit, which can reduce the need for multiple power supplies in an ATE system. Technical Specifications Output Ratings

• Output Voltage: 0 to 300V
• Output Current: 0 to 8A
• Output Power: 600W Electrical Characteristics
• Constant Power Operation: Allows for flexible combinations of voltage and current within the power rating. This means the instrument can provide high voltage with low current and low voltage with high current from a single unit.
• Power Factor Correction: 0.95
• Line Regulation (Voltage): 0.01% + 18mV
• Line Regulation (Current): 0.03% + 20mA
• Load Regulation (Voltage): 0.01% + 3mV to 0.01% + 50mV
• Load Regulation (Current): 0.1% + 0.1%F.S.
• Output Noise (Voltage Ripple P-P): 50 mV to 180 mV
• Efficiency: 0.8 to 0.85
• Drift (8 hours): Specified in manual
• Temperature Coefficient: Specified in manual Measurements and Readback
• Precision V&I Measurements: Offers 16-bit readback capability for accurate voltage and current readings.
• Voltage Measurement Accuracy: 0.05% + 0.05%F.S.
• Current Measurement Accuracy: 0.1% + 0.1%F.S. Programming and Control
• High-Speed Programming:
• Auto Sequencing Programming: 10 Programs / 100 Sequences / 8-bit TTL
• Voltage Ramp Function: Time range from 5ms to 99 hours or 10ms to 99 hours
• Voltage and Current Slew Rate Control:
• APG (Analog Programmable Interface): With Isolated Analog Interface Card
• Remote Sense: Includes 5V Line Loss Compensation.
• Master/Slave Control: For parallel or serial operation to achieve current sharing. The master unit scales values and downloads data to slave units for simplified programming and automatic current sharing.
• Output Trigger Signal: For system timing measurements.
• Complex DC Transients Waveforms: Ability to create waveforms to test device behavior to spikes, drops, and voltage deviations. Ideal for testing devices that experience voltage interrupts.
• Programming Response Time (Typical): Specified in manual
• Transient Response Time: Specified in manual Interfaces
• Standard: RS-232 and USB
• Optional: GPIB with SCPI, Ethernet/LXI interface
• Analog Interface: APG (Analog Programmable Interface)
• I/O Ports: Provide 8-bit TTLs, DC-ON, fault output signal, and remote inhibit. Protection Features
• Over-Voltage Protection (OVP)
• Current Limit (OCP)
• Over-Temperature Protection (OTP)
• Over-Power Protection (OPP)
• SENSE FAULT Protection Physical
• Mounting Type: Bench Top
• Display: LCD
• User Interface: Digital Encoder Knobs, Keypad, and Function Keys Applications
• DC/DC Converter & Inverter Voltage Dropout Testing
• Engine Start-up Simulation
• Battery Automated Charging
• Electronic Product Life Cycle Testing
• Airborne Avionics Testing
• Soft Start Testing
• Voltage Step Waveform Generation
• D/D Converter Sag, Cycle Drop, and Surge Testing
• Pulse Charge of Battery
• Line Regulation Testing
• Turn on Time of Setting 80V
• Voltage Sequence Program Testing Why Choose Aumictech for Chroma 62006P-300-8? At Aumictech, we specialize in supplying high-end programmable DC power supply equipment. Whether you need precise voltage and current control for automated testing, the flexibility of a constant power envelope for diverse applications, or solid protection features for reliable operation, our team ensures the Chroma 62006P-300-8 delivers maximum performance for your laboratory or enterprise procurement needs.