Anritsu 68117C Synthesized Signal Generator, 0.01 – 8.4 GHz
Anritsu 68117C,Signal generator covering 10 MHz to 8.4 GHz, offering clean signal output with fast frequency switching. Suitable for wireless, radar, and communication testing. Includes modulation modes and remote interface support.
- Model
- Anritsu 68117C
- Calibration
- Available on request
- Price
- $3,579
- Status
- In stock
- RFQ ref
- 68117C
This unit
The Anritsu 68117C is a synthesized signal generator spanning 0.01 GHz to 8.4 GHz, designed for wireless, radar, and communication system test and measurement. It delivers fast frequency switching in automated test equipment and benchtop environments, with output power ranging from –125 dBm to +17 dBm and ultra-low phase noise performance. The instrument executes step sweeps across 1 to 10,000 steps with dwell times from 1 ms to 99 seconds per step, supporting list sweep storage of up to 2000 non-volatile points.
Internal modulation generators provide seven waveforms including Gaussian noise, arbitrary waveforms, and pulse modulation with doublet, triplet, or quadruplet capability for radar blind spot testing. Oven-stabilized frequency reference maintains <5×10⁻¹⁰ per day stability. A compact 13.3 cm form factor optimizes ATE rack density while remote interface capability enables seamless test system integration.
Technical Specifications
- Frequency Range: 0.01 GHz to 8.4 GHz
- Output Power: Maximum +17 dBm; leveled output –120 dBm in 0.01 dB steps; minimum power –125 dBm
- Phase Noise: –107 dBc SSB at 10 kHz offset
- Frequency Stability: <5×10⁻¹⁰ per day (oven-stabilized reference)
- Frequency Resolution: 1 kHz standard; 0.1 Hz with Option 11
- Switching Speed: 5 ms typical; <15 ms + 1 ms/GHz or <40 ms maximum for step sweep
Key Features
- Step sweep with variable steps (1 to 10,000), 1 kHz to full-range step sizes, dwell times 1 ms to 99 seconds per step
- List sweep: 1000 frequencies in volatile memory, 2000-point table in non-volatile memory
- Alternate sweep mode between two ranges with independent power level assignment
- Manual sweep with user-selectable steps or step size
- Seven internal modulation waveforms plus user-defined arbitrary waveforms
- Pulse modulation with doublet, triplet, quadruplet, and swept delay for target simulation
- Simultaneous synchronized modulations for complex signal generation
Typical Applications
- Automated test equipment for wireless and communication systems
- Radar system characterization and blind spot testing
- ATE rack integration with optimized compact footprint
Compatibility & Integration Remote interface support enables straightforward integration into multi-instrument test setups. Part of the Anritsu 68C/69B series.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 0.01 GHz to 8.4 GHz | Power Range (dBm): –125 dBm to +17 dBm |
Anritsu 68117C — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu 68117C. Calibration covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Anritsu 68117C faults: YIG oscillator failure (no output or loss of lock), step attenuator wear (output drops or steps at set attenuation), ALC loop failure (uncontrolled output power), I/Q modulator assembly failure. HP/Agilent 836xx series most common faults are YIG oscillator failure and step attenuator contact wear causing output steps or drops at specific attenuation settings. Keysight E4428C/E4438C units most commonly develop ALC loop failure and I/Q modulator assembly faults. YIG oscillator replacement and attenuator service are stocked repairs.
Anritsu 68117C price
This Anritsu 68117C is listed at $3,579. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu 68117C calibration cost
NIST-traceable calibration for the Anritsu 68117C is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. Turnaround is 1 to 3 business days after receipt. See full calibration details →
