HP / Agilent 6813A AC power source/analyzer 1750 VA
The HP/Agilent 6813A is a versatile AC power source and analyzer with a power rating of 1750 VA. It provides precise control and measurement of AC voltage, current, and power, making it suitable for testing and evaluating a wide range of electronic devices and systems. Its analyzer capabilities allow for detailed analysis of power waveforms and parameters.
- Model
- HP / Agilent 6813A
- Calibration
- Available on request
- Price
- $5,650
- Status
- In stock
- RFQ ref
- 6813A
This unit
The HP/Agilent 6813A is a single-phase AC power source and analyzer delivering 1750 VA of output power. This benchtop instrument combines programmable AC source capability with integrated power analysis, enabling simultaneous generation and measurement of AC waveforms in a single device. It supports sine, square, clipped sine, and user-defined arbitrary waveforms with full transient generation and power line disturbance simulation.
Technical Specifications Output Power & Voltage/Current
Output power: 1750 VA
Maximum AC voltage: 300 V RMS
Maximum AC current: 13 A RMS
Repetitive and non-repetitive peak current: 80 A
Crest factor: 6
DC voltage range: ±425 V
Maximum DC current: 10 A
DC power output: 1350 W
Output frequency range: DC; 45 Hz to 1 kHz
Output impedance: Programmable Waveform Generation
Standard waveforms: Sine, square, clipped sine, and user-defined
Clipped sine distortion: 0% to 43%
Transient modes: Step and pulse for single and continuous changes
Power line disturbances: Sag, surge, dropout, clipping, event programming
Voltage and frequency slew control supported Measurement & Analysis
Parameters: Vrms, Irms, Ipeak, frequency, phase, VA, watts, power factor, THD
Harmonic analysis to 50th harmonic (output ≤250 Hz)
Waveform digitization: 16-bit resolution for voltage and current
Real, reactive, and apparent power measurements Environmental & Physical
AC line input: 220 V to 240 V / 60 Hz / 1 Ph
Installation category: II
Pollution degree: 2
Maximum operating altitude: 2000 m
Maximum humidity: 95%
Form factor: Benchtop
Key Features
Integrated source and analyzer eliminates dual-instrument test setups
Harmonic content analysis for compliance and distortion testing
Arbitrary waveform generation for complex test scenarios
16-bit waveform capture with full THD measurement
Real-time power quality assessment
Typical Applications
Power supply evaluation and validation
Regulatory compliance testing (UPS, inverters, motor drives)
AC line disturbance simulation and transient testing
Harmonic content and power factor characterization
Complex AC waveform generation and measurement
Compatibility & Integration
HP-IB and RS-232 interfaces
SCPI programming support
Front-panel graphical user interface
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | DC |
| 45 Hz to 1 kHz | Voltage / Current Range | 0-10 A DC, 0-13 A RMS |
HP / Agilent 6813A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the HP / Agilent 6813A. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
HP / Agilent 6813A price
This HP / Agilent 6813A is listed at $5,650. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
HP / Agilent 6813A calibration cost
NIST-traceable calibration for the HP / Agilent 6813A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
