Anritsu 69263A Synthesized Signal Generator, 2 – 40.0 GHz
Anritsu 69263A Synthesized Signal Generator,Delivers reliable signal output from 2 to 40 GHz with fine-tuned resolution and stable amplitude. Commonly used in military RF systems testing, microwave link development, and broadband communications.
- Model
- Anritsu 69263A
- Calibration
- Available on request
- Price
- $20,579
- Status
- In stock
- RFQ ref
- 69263A
This unit
The Anritsu 69263A is a synthesized signal generator delivering precise RF signal output across 2 GHz to 40.0 GHz. Built for demanding applications in military RF systems testing, microwave link development, and broadband communications, the instrument combines fine frequency resolution with stable amplitude control to enable accurate, repeatable measurements.
Technical Specifications
Frequency Performance- Frequency range: 2 GHz to 40.0 GHz
- Frequency resolution: 1 kHz standard; 0.1 Hz with Option 11
- Frequency accuracy: < 2 × 10⁻⁸/day with aging, < 2 × 10⁻⁸/°C over 0°C to 55°C. With Option 16: < 5 × 10⁻¹⁰/day and < 2 × 10⁻¹⁰/°C
- Phase-locked frequency control for precision tuning Output Characteristics
- Stable amplitude output across the operating range
- Typical second harmonic levels measured at maximum output power
- AM noise floor specifications available Sweep & Modulation
- Step sweep: 1 to 10,000 steps; 1 kHz minimum step size (0.1 Hz with Option 11)
- Switching time: < 15 ms + 1 ms/GHz step size, or < 40 ms maximum
- Dwell time per step: 1 ms to 99 seconds variable
- Analog, step, and manual sweep modes
- Alternate sweep mode for dual-range operation with independent power levels
- Internal AM, FM, and Pulse modulation (related models; Option 11 enhances resolution)
- Ultra-low SSB phase noise characteristic of Anritsu synthesizers
Key Features
- GPIB control supports up to 1,000 non-sequential phase-locked frequencies for automated step sweep
- Manual sweep mode provides stepped, phase-locked frequency adjustment with user-selectable steps or step size
- Internal modulation waveforms including Gaussian noise and user-defined arbitrary waveforms (related models)
- Time-base accuracy dependent on 10 MHz reference
Typical Applications
- Military RF systems testing and validation
- Microwave link development and characterization
- Broadband communications signal generation
- Phase-locked frequency stepping and automation
Compatibility & Integration
- GPIB control interface for automated test sequences
- MX269018A software supports analog modulation types (FM, AM)
- Compatible with step-sweep automation and frequency-agile testing workflows
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 2 GHz to 40.0 GHz |
Anritsu 69263A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu 69263A. Calibration covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Anritsu 69263A faults: YIG oscillator failure (no output or loss of lock), step attenuator wear (output drops or steps at set attenuation), ALC loop failure (uncontrolled output power), I/Q modulator assembly failure. HP/Agilent 836xx series most common faults are YIG oscillator failure and step attenuator contact wear causing output steps or drops at specific attenuation settings. Keysight E4428C/E4438C units most commonly develop ALC loop failure and I/Q modulator assembly faults. YIG oscillator replacement and attenuator service are stocked repairs.
Anritsu 69263A price
This Anritsu 69263A is listed at $20,579. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu 69263A calibration cost
NIST-traceable calibration for the Anritsu 69263A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. Turnaround is 1 to 3 business days after receipt. See full calibration details →
