Kalmus 827FC
Kalmus RF Amplifiers. Frequency Range: 10 kHz to 200 MHz (500 W output), Bandwidth: Broad.
- Model
- Kalmus 827FC
- Calibration
- Available on request
- Price
- $6,800
- Status
- In stock
- RFQ ref
- 827FC
This unit
The Kalmus 827FC is an RF power amplifier engineered for industrial and laboratory applications demanding amplification across a broad frequency spectrum. Built on rugged RF power MOSFET design, it delivers up to 500 Watts output power in the lower frequency band with a typical power gain of 50 dB. The amplifier operates linearly across CW, pulse, and sweep applications without band switching, maintaining low compression at rated power and minimal distortion for precise signal fidelity.
Technical Specifications
Frequency Range: 10 kHz to 200 MHz (500 W output); 200 MHz to 1 GHz (100 W output)
Output Power: Up to 500 W (10 kHz–200 MHz); Up to 100 W (200 MHz–1 GHz)
Power Gain: 50 dB (typical)
Instantaneous Bandwidth: Broad, enabling continuous operation across full frequency range without switching
Linear Operation: CW, pulse, and sweep capable with low compression
VSWR Protection: Active protection for amplifier and load
Cooling: Air cooled
Connectors: Standard rear connectors (optional rear configurations available)
Key Features
High linearity and low distortion output at rated power levels
Automatic Leveling Control (ALC) maintains constant output power
RF power sensors enable real-time power monitoring
Comprehensive remote control of all front-panel functions
Safety interlock input for operational protection
Air-cooled design for sustained operation in industrial environments
Typical Applications
EMC immunity testing
Communications systems
ISM band applications
Compatibility & Integration The 827FC integrates remote monitoring and control capabilities, allowing networked adjustment and status readback. Standard and optional rear connector configurations accommodate diverse system architectures.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 10 kHz to 200 MHz (500 W) |
Kalmus 827FC — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Kalmus 827FC. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Kalmus 827FC price
This Kalmus 827FC is listed at $6,800. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Kalmus 827FC calibration cost
NIST-traceable calibration for the Kalmus 827FC is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
