Cosel ADA1000F-30 AC/DC Power Supply
Cosel DC Power Supplies. Current: 16.5–33.5A continuous.
- Model
- Cosel ADA1000F-30
- Calibration
- Available on request
- Price
- $450
- Status
- In stock
- RFQ ref
- ADA1000F-30
This unit
The Cosel ADA1000F-30 is a 1000W AC/DC power supply engineered for industrial and commercial systems requiring stable 30V output at high current density. Universal input acceptance (AC 85-264V, single-phase) combined with selectable cooling modes - convection or forced air - enables deployment across varied thermal environments. The unit delivers 16.5A to 33.5A depending on input voltage and cooling configuration, with peak output reaching 1500W to 1980W. Active filter and forward converter topology achieve IEC61000-3-2 harmonic compliance. Comprehensive protection includes automatic-recovery overcurrent limiting (>101% peak current threshold), built-in overvoltage and thermal shutdown, and inrush current limiting. Adjustable output spans 27.0V to 33.0V. Multiple operational modes - parallel, master-slave, and N+1 redundancy - support system-level reliability through optional modules. Remote ON/OFF control, alarm signaling, and current monitoring are available as field-selectable options. DIN rail mounting accommodates space-constrained installations.
Technical Specifications
Output: 30V, adjustable 27.0–33.0V
Power Rating: 1000W nominal; 1500–1980W peak (input and cooling dependent)
Input: AC 85–264V single-phase (50/60 Hz); DC 120–350V optional
Output Current: 16.5–33.5A continuous; 50–66A peak
Cooling: Convection or forced air with optional fan unit
Protection: Overcurrent (>101% threshold, auto-recovery), overvoltage, thermal shutdown, inrush limiting
Switching Frequency: 130 kHz typical
Input Fuse: 250V, 25A
Circuit Architecture: Active filter, forward converter
Harmonic Attenuation: IEC61000-3-2 compliant
Key Features
Voltage adjustment range 27.0–33.0V accommodates diverse load regulation requirements
Dual thermal modes: convection baseline and forced-air upgrade for high-density applications
Automatic overcurrent recovery eliminates nuisance trips in transient conditions
N+1 and master-slave paralleling for fault tolerance and load sharing
Low-leakage current options available for sensitive equipment
Remote control via isolated 4.5–12.5V signal input
Typical Applications
Industrial process control and PLCs
Telecom infrastructure and distributed power systems
Industrial automation and motor control
Test and measurement systems
Redundant power architectures
Compatibility & Integration Parallel and redundancy modes require matched output voltage across units; output current in series configuration must remain below the lowest unit's rated current. Optional remote ON/OFF accepts external 4.5–12.5V logic signals. Alarm and current monitor outputs enable system integration and telemetry.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 130 kHz | Voltage / Current Range: 16.5-33.5A @ 1000W, 30V output (adjustable 27.0-33.0V), 50-66A peak, AC 85-264V input |
Cosel ADA1000F-30 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Cosel ADA1000F-30. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Cosel ADA1000F-30 price
This Cosel ADA1000F-30 is listed at $450. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Cosel ADA1000F-30 calibration cost
NIST-traceable calibration for the Cosel ADA1000F-30 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
