Ando AQ2200-211
Ando Optical Power Sensors. Model: AQ2200-211.
- Model
- Ando AQ2200-211
- Calibration
- Available on request
- Price
- $1,499
- Status
- In stock
- RFQ ref
- AQ2200-211
This unit
The Ando AQ2200-211 is a high-sensitivity optical sensor module for long-wavelength power measurement within the AQ2200 Multi Application Test System. Installed in compatible AQ2200 series frame controllers, it delivers high-speed, high-accuracy optical power measurements across multiple channels with exceptional polarization stability. The module captures power fluctuations at 100 µs data acquisition intervals and stores up to 20,000 data points per channel, enabling detailed characterization of dynamic optical signals.
Technical Specifications
- Measurement Range: +10 dBm to –80 dBm
- Data Acquisition Interval: 100 µs minimum
- Data Storage Capacity: 20,000 data points per channel
- Polarization Dependence: 0.005 dBp-p or less
- Analog Output: D/A conversion at 100 µs intervals (not direct analog amplified output)
- Data Interface: USB storage for acquired data
Key Features
- Simultaneous multi-channel optical power measurement capability
- Low polarization dependence enables accurate PDL assessment
- High temporal resolution resolves fast power transients
- Substantial onboard storage eliminates frequent data offload requirements during extended measurements
Typical Applications
- Optical component characterization and validation
- Multi-wavelength signal power profiling
- Polarization-dependent loss (PDL) evaluation
- Dynamic optical signal monitoring and analysis
Compatibility & Integration The AQ2200-211 integrates with AQ2200 series frame controllers including AQ2201 and AQ2202 models. An AQ2200-202 Interface Module may be required for certain system configurations. Direct connection to USB enables data logging and system integration without external acquisition hardware.
Specifications
| Parameter | Value |
|---|---|
| Power Range (dBm) | '+10 dBm to –80 dBm |
Ando AQ2200-211 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Ando AQ2200-211. Calibration covers detector responsivity across all specified wavelengths (typically 800-1700 nm range), absolute power accuracy, and EEPROM calibration coefficient update. Compatible with Agilent/HP 8163A/B, 8164A/B, and 8166A/B mainframes.. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Ando AQ2200-211 faults: FC/PC connector damage, EEPROM failure (mainframe shows unrecognized sensor), reduced responsivity. Common faults include FC/PC input connector damage, EEPROM failure causing the module to appear unrecognized by the mainframe, and reduced detector responsivity from contamination.
Ando AQ2200-211 price
This Ando AQ2200-211 is listed at $1,499. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Ando AQ2200-211 calibration cost
NIST-traceable calibration for the Ando AQ2200-211 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers detector responsivity across all specified wavelengths (typically 800-1700 nm range), absolute power accuracy, and EEPROM calibration coefficient update. Compatible with Agilent/HP 8163A/B, 8164A/B, and 8166A/B mainframes.. Turnaround is 1 to 3 business days after receipt. See full calibration details →
