BP Microsystems ASM20SS Automated SSOP Socket Module
BP Microsystems Embedded Test Systems. Model: ASM20SS.
- Model
- BP Microsystems ASM20SS
- Calibration
- Available on request
- Price
- $650
- Status
- In stock
- RFQ ref
- ASM20SS
This unit
The BP Microsystems ASM20SS is an automated socket module engineered for high-volume SSOP device programming within integrated circuit manufacturing and laboratory environments. It has structured device placement, electrical interfacing, and concurrent multi-site operation for 20- to 56-pin shrink small outline packages. The module delivers independent pin drivers and waveform generators per site, enabling parallel test and programming workflows across multiple devices simultaneously.
Technical Specifications Device Support
SSOP packages: 20–56 pin count
Lead tip-to-tip: 7.8 mm or 16 mm
Pitch: 0.65 mm or 0.8 mm Electrical Performance
Pin drivers: 240 pins standard per site
Vpp: 0 V to 25 V
Ipp: Up to 1.2 A total
Vcc: 0 V to 13 V
Icc: 0–2 A
Digital I/O: 0–4.5 V
Clock frequency: 800 kHz to 200 MHz
Rise time: 350 ps
Protection: ESD, overcurrent shutdown, power failure shutdown Environmental
Operating temperature: 13 °C to 32 °C
Relative humidity: 30–80% Physical Dimensions
Length: 298 mm
Width: 220 mm
Working height (excluding sockets): 119 mm
Weight: 3.28 kg
Key Features
Fully independent pin drivers and waveform generators for each site enable concurrent operations
Backward compatibility with 7th and 8th generation sockets on 9th generation sites
Integrated circuit protection against ESD, overcurrent, and power loss conditions
Clock speeds extending to 200 MHz support high-frequency device programming protocols
Typical Applications Automated programming of SSOP-packaged microcontrollers, memory devices, and mixed-signal ICs in manufacturing and R&D settings requiring multi-site parallel throughput.
Compatibility & Integration Designed for direct integration with BP Microsystems automated programming systems. Socket module series supports continuous updates and reuse of legacy socket hardware with current platform generations.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 800 kHz to 200 MHz | Voltage / Current Range: Icc: 0–2 A |
| Digital | 0–4.5 V, Ipp: up to 1.2 A |
| Vcc | 0–13 V, Vpp: 0–25 V |
BP Microsystems ASM20SS — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the BP Microsystems ASM20SS. Calibration covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common BP Microsystems ASM20SS faults: power supply failure (cRIO-9073/9074), C-series slot connector wear, PXI chassis fan failure, GPIB interface failure on VXI controllers, BIOS/EEPROM corruption. NI CompactRIO most common faults are power supply failure on older cRIO-9073/9074 chassis and C-series module slot connector wear from repeated hot-swap cycles. PXI chassis fan failure is the most common wear item — chassis fans are field-replaceable. VXI embedded controllers most commonly develop EEPROM corruption and GPIB interface failure.
BP Microsystems ASM20SS price
This BP Microsystems ASM20SS is listed at $650. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
BP Microsystems ASM20SS calibration cost
NIST-traceable calibration for the BP Microsystems ASM20SS is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. Turnaround is 1 to 3 business days after receipt. See full calibration details →
