Kepco ATE15
Kepco DC Power Supplies. Bandwidth: 10.6 kHz (voltage and current), Current: mode recovery.
- Model
- Kepco ATE15
- Calibration
- Available on request
- Price
- $450
- Status
- In stock
- RFQ ref
- ATE15
This unit
The Kepco ATE15-15DM is a 250-watt linear programmable DC power supply in half-rack form factor, engineered for benchtop and system integration applications requiring precision analog control. It delivers 0 to 15 VDC and 0 to 15 ADC with automatic voltage/current mode crossover, exceptional output stability, and remote programming capability.
Technical Specifications Output Performance
DC Output: 0–15 VDC, 0–15 ADC
Output Impedance (Voltage Mode): 20 µΩ (slow), 0.5 µH (fast), 5 µH (slow)
Output Impedance (Current Mode): 30 kΩ (slow), 5,800 µF (fast), 2 µF (fast)
Line Regulation: Better than 0.0005% E₀ max.
Load Regulation: Better than 0.01% E₀ max.
Ripple and Noise (rms): < 0.1 mV
Ripple and Noise (peak-to-peak, 20 Hz–10 MHz BW): < 1 mV
Programming Response Time: 15 µsec (voltage and current)
Programming Bandwidth: 10.6 kHz (voltage and current)
Key Features
Equally controllable voltage and current outputs with automatic mode crossover
10-turn panel-mounted rheostats for local voltage and current adjustment
0–10 V analog remote programming input
Digital LCD display for output monitoring
Programmable overvoltage protection (OVP) via manual setting or 0–10 V analog signal
User-selectable capacitorless output for fast analog programming or rapid current-mode recovery
Mode-status LEDs indicating voltage or current operation
Optically isolated I/O for multi-supply interconnection
Two uncommitted amplifiers for signal conditioning
Multi-terminal user port configured via jumper plug (PC-12)
Optional fast mode for accelerated programming response
Integrated overvoltage and overcurrent protection
Typical Applications Demanding electronic testing, component characterization, system power distribution, and laboratory benchtop scenarios where low-noise, precision voltage and current sourcing are required.
Compatibility & Integration Optical isolation supports parallel or cascaded operation. Analog programming interface enables integration with external control systems. Uncommitted amplifiers facilitate custom signal processing and control logic implementation.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | 0–15 ADC, 0–15 VDC |
Kepco ATE15 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Kepco ATE15. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Kepco ATE15 price
This Kepco ATE15 is listed at $450. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Kepco ATE15 calibration cost
NIST-traceable calibration for the Kepco ATE15 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
