BP Microsystems BP-1400/240 Universal Device Programmer
The BP Microsystems BP-1400/240 is a universal device programmer designed for programming a wide range of integrated circuits (ICs). It supports various device types, including EPROMs, EEPROMs, flash memory, microcontrollers, and programmable logic devices (PLDs). This programmer is suitable for both engineering and production environments, offering high-speed programming and reliable performance.
- Model
- BP Microsystems BP-1400/240
- Calibration
- Available on request
- Price
- $1,850
- Status
- In stock
- RFQ ref
- BP-1400/240
This unit
The BP Microsystems BP-1400/240 is a universal device programmer engineered for high-speed programming and functional testing of integrated circuits across engineering and production environments. This 240-pin universal programmer supports all major device technologies and package types, delivering rise times of 800ps at the programming socket without overshoot or ground bounce. The system accommodates devices operating down to 2.7V, enabling support for advanced low-voltage technologies while maintaining the ability to functionally test high-speed PLDs with speeds as low as 3ns.
Technical Specifications
Device Support: EPROM, EEPROM, Flash memory (up to 32MB), microcontrollers, PLDs, CPLDs, PALs, FPGAs, and anti-fuse FPGAs
Package Support: DIP, PLCC, TSOP, SSOP, SOIC, LCC, PCMCIA, QFP, PGA, and BGA packages up to 240 pins
Pin Drivers: 240 standard pin drivers operating down to 2.7V
Rise Time: 800ps at programming socket (no overshoot or ground bounce)
Voltage Range: 2.7V to 3.3V (low-voltage device support)
Programming Architecture: Based on BP-2200 Concurrent Programming System, single-site configuration
Testing: Full vector testing and 100% continuity testing; 240-pin device support
Key Features
High-speed bipolar analog pin drivers with microstrip transmission lines
Interchangeable socket modules for package-type switching
Pre-programming 100% continuity verification on all devices
Functional testing capability for devices with speeds as low as 3ns
Universal programmer compatibility across all package types
Typical Applications
Production programming of high-pin-count devices and BGA packages
Engineering development with mixed device technology requirements
Functional verification of high-speed programmable logic
Low-voltage device programming and testing
Compatibility & Integration Historically operated on Windows 98, with later compatibility for Windows XP and Windows 7 environments. Associated with BPWin software; final supported version for legacy BP-1400 systems was BPWin 4.73. Note: The BP-1400/240 reached manufacturer end-of-life as of December 31, 2008, with discontinuation of official support.
BP Microsystems BP-1400/240 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the BP Microsystems BP-1400/240. Calibration covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common BP Microsystems BP-1400/240 faults: power supply failure (cRIO-9073/9074), C-series slot connector wear, PXI chassis fan failure, GPIB interface failure on VXI controllers, BIOS/EEPROM corruption. NI CompactRIO most common faults are power supply failure on older cRIO-9073/9074 chassis and C-series module slot connector wear from repeated hot-swap cycles. PXI chassis fan failure is the most common wear item — chassis fans are field-replaceable. VXI embedded controllers most commonly develop EEPROM corruption and GPIB interface failure.
BP Microsystems BP-1400/240 price
This BP Microsystems BP-1400/240 is listed at $1,850. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
BP Microsystems BP-1400/240 calibration cost
NIST-traceable calibration for the BP Microsystems BP-1400/240 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. Turnaround is 1 to 3 business days after receipt. See full calibration details →
