Abaco Systems / Ramix CP610/1-3U CompactPCI with 10/100BaseTX Ethernet
CompactPCI single board computer with 10/100BaseTX Ethernet interface.
- Model
- Abaco Systems / Ramix CP610/1-3U
- Calibration
- Available on request
- Price · starting from
- $1,050
- Status
- In stock
- RFQ ref
- CP610/1-3U
This unit
The Abaco Systems / Ramix CP610/1-3U is a 3U CompactPCI single board computer featuring 10/100BaseTX Ethernet connectivity. This board delivers networking through multiple 10/100BaseTX ports operating in full-duplex mode at both 10 Mbps and 100 Mbps. The integrated Ethernet/PCI chipset incorporates a powerful DMA engine and deep FIFO buffers to maintain continuous full-bandwidth operation while minimizing PCI bus impact.
A PCI-to-PCI bridge optimizes performance and reduces PCI loading in multi-board configurations. The board supports full auto-negotiation to automatically configure to the highest possible operating mode, ensuring efficient integration into standard CompactPCI systems. RJ45 connectors provide copper-based Ethernet connectivity.
The board interfaces with 64-bit/66 MHz PCI bus architecture and supports configurations with single, dual, or quad port availability depending on model variant.
Technical Specifications
- Form Factor: 3U CompactPCI
- Ethernet Interface: 10/100BaseTX
- Ethernet Operation: Full-duplex at 10 Mbps and 100 Mbps
- Connectors: RJ45
- Media: Copper
- PCI Bus: 64-bit/66 MHz with PCI-to-PCI bridge
- Ethernet/PCI Chipset: DMA engine with deep FIFO buffers
Key Features
- Auto-negotiation facility for automatic speed and duplex configuration
- PCI-to-PCI bridge topology reduces bus loading in multi-port and multi-board systems
- Deep FIFO buffering supports sustained full-bandwidth operation
- DMA-capable Ethernet/PCI controller minimizes host processor overhead
Compatibility & Integration The CP610/1-3U integrates directly with standard CompactPCI backplanes and 64-bit/66 MHz PCI host systems. Related RM610 PCI Ethernet NIC boards can be directly cabled for dedicated 800 Mbit full-duplex inter-board communication paths, enabling point-to-point high-speed data transfers in compatible architectures.
Abaco Systems / Ramix CP610/1-3U — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Abaco Systems / Ramix CP610/1-3U. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Abaco Systems / Ramix CP610/1-3U price
This Abaco Systems / Ramix CP610/1-3U is listed at $1,050. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Abaco Systems / Ramix CP610/1-3U calibration cost
NIST-traceable calibration for the Abaco Systems / Ramix CP610/1-3U is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
