Abaco Systems / Radstone PMC-ATMF-2BA-100 155 Mbps ATM Network PMC Card
PMC card for ATM networking, supporting 155 Mbps data rates.
- Model
- Abaco Systems / Radstone PMC-ATMF-2BA-100
- Calibration
- Available on request
- Price · starting from
- $1,050
- Status
- In stock
- RFQ ref
- PMC-ATMF-2BA-100
This unit
The Abaco Systems / Radstone PMC-ATMF-2BA-100 is a 155 Mbps ATM network interface card in PCI Mezzanine Card form factor, delivering cell processing for embedded systems requiring OC-3 connectivity. Built on the NICStAR chipset, this card implements full ATM protocol support with hardware acceleration across multiple adaptation layers, supporting up to 16,384 receive connections and over 20,000 transmit connections simultaneously.
Technical Specifications
- Data Rate: 155 Mbps
- PCI Interface: 33 MHz PCI 2.0 compliant, 32-bit
- Physical Interface: Multimode fiber optical with SC connectors (OC-3)
- On-Board Buffer RAM: 128 KB
- Form Factor: IEEE 1386.1 PCI Mezzanine Card (PMC)
Key Features
- Hardware support for ATM Adaptation Layers 0, 3/4, and 5
- Raw cell format support
- Bus master scatter-gather DMA with block transfers up to 12 words
- 32-bit burst mode operation
- Multimode fiber optical interface with SC connectors for levels 1 and 2; custom optical circuits for levels 3 and 4 ruggedization
- Compliant with ANSI T1S1 5/92-002R3, ITU I.361, and ATM Forum UNI 3.0/3.1 standards
Typical Applications Embedded systems requiring ATM network connectivity, high-throughput data processing in network appliances, and OC-3 level telecommunications equipment integration.
Compatibility & Integration Fully PCI 2.0 compliant with support for bus master DMA and scatter-gather operations. Available in multiple ruggedization levels
Level 1 for standard environments through Level 4 conduction-cooled variants for harsh operational conditions.
Abaco Systems / Radstone PMC-ATMF-2BA-100 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Abaco Systems / Radstone PMC-ATMF-2BA-100. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Abaco Systems / Radstone PMC-ATMF-2BA-100 price
This Abaco Systems / Radstone PMC-ATMF-2BA-100 is listed at $1,050. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Abaco Systems / Radstone PMC-ATMF-2BA-100 calibration cost
NIST-traceable calibration for the Abaco Systems / Radstone PMC-ATMF-2BA-100 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
